2004-2011 Volvo S40 Maintenance Service Light Reset Guide

Time needed: 7 minutes

When the Maintenance Overdue message appears in the display, it’s time for regular service at the workshop. The system must be reset after performed the maintenance service on your vehicle. Here is how to reset the maintenance light on 2004 2005 2006 2007 2008 2009 2010 2011 Volvo S40:

1. Turn off the ignition and open the driver’s door

   Make sure your vehicle is stopped in a safe place
2. Place the ignition to the position I

   If your vehicle has the keyless starting system, keep the remote key into the ignition slot, press the START/STOP ENGINE once

3. Trip mode needs to be on TRIP 1 or T1

   Press the TRIP button on cluster to select the trip mode
   

4. Hold down the TRIP button and then place the ignition to the position II

   If your vehicle has the keyless starting system, keep press the TRIP button while holding the START/STOP ENGINE for 2 seconds

5. Keep hold the TRIP button until the ⓘ indicator blinks

   Release the Trip button when the ⓘ indicator flash 3 times

6. Verify the indicator has been reset by shut off the car and then starting the engine

   Done!