Vauxhall Meriva: How To Reset Service Light After Oil Change (2010-2016)

Vauxhall Meriva: How To Reset Service Light After Oil Change (2010-2016) – The Vauxhall Meriva is a mid-range minivan produced in two series from 2003 to 2017 by the German car manufacturer Opel. It was replaced by the Opel Crossland X, a crossover SUV car built on Peugeot mechanics and chassis, the first model born from the PSA group’s acquisition.

The Meriva, based on the Corsa C platform, inherited its main chassis characteristics, including the front with independent wheels with cross arms and stabilizer bar and the rear with interconnected wheels. The braking system was with discs, both front, and back with the front discs also self-ventilating.

Vauxhall Meriva: How To Reset Service Light After Oil Change (2010-2016)

Vauxhall Meriva: How To Reset Service Light After Oil Change (2010-2016)

When the system has calculated that oil life has exceeded the specified service interval, a warning message will appear in the display. You need perform an oil change reset the system. Depending on your vehicle model, here are a few ways to reset the oil life light on 2010 2011 2012 2013 2014 2015 2016 2017 Vauxhall Meriva:

With Base Level Display

Time needed: 7 minutes.

Follow these instructions if your vehicle is equipped with a base level display:

  1. Turn on the ignition without starting the engine

    If your car equipped with ignition button, press and hold the Start/Stop button for 5 seconds without touch the brake pedal

  2. Press the MENU button briefly until VEHICLE INFORMATION MENU appears on the screen

    The button is located on the turn signal lever
    oil life oil change light reset

  3. Scroll down and find OIL LIFE menu

    Use the band to scroll through the menu

  4. Press and hold the SET/CLR button until Oil Life 100% appears on the screen

    The sound of chimes will be heard

  5. Verify the indicator has been reset by starting the engine

    Done!

With Up Level Display

  • Turn on the ignition without starting the engine
  • Highlight the VEHICLE tab menu by pressing the MENU button on the turn signal lever
oil life oil change light reset
  • Scroll down and find OIL LIFE menu by using the band
  • Press and hold the SET/CLR button until Oil Life 100% appears on the screen
  • Verify the indicator has been reset by starting the engine

These instructions are based on the Vauxhall Meriva owner’s manual. This procedure should apply to the second generation of the Vauxhall Meriva (2010 2011 2012 2013 2014 2015 2016 2017 model years). Hopefully, the article Vauxhall Meriva: How To Reset Service Light After Oil Change (2010-2016) can solve your problem. Good Luck!

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.