How To Reset Lincoln MKX TPMS Tire Pressure Monitoring Sensor Light

How To Reset Lincoln MKX TPMS Tire Pressure Monitoring Sensor Light – The Lincoln MKX is a mid-size luxury crossover car produced by Lincoln since 2007. The MKX debuted in December 2006 for the 2007 model year. It was prefigured by a concept car that was unveiled to the public at the 2004 Detroit Car Show. The MKX is basically a Ford Edge version obtained through badge engineering and is built on Ford’s CD3 platform similar to the model mentioned and the Mazda CX-9. The MKX has a five-door crossover bodywork.

The model is equipped with a monocoque structure and is front-wheel drive. But, among the options, there is the full traction. The MKX has installed a V6 Duratec 3.5-liter cylinder engine, coupled to a six-speed automatic transmission. The engine is entirely made of aluminum and emits 265 hp of power at 6,250 pm and 340 Nm of torque at 4,500 pm. The MKX is assembled in Oakville, Canada, and has been facelifted in 2011.

How To Reset Lincoln MKX TPMS Tire Pressure Monitoring Sensor Light

If you receive a low-tire-pressure monitoring system (TPMS) warning light while driving and you want to clear or turning off the warning light on your 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Lincoln MKX, follow these instructions:

• Make sure the vehicle is at a complete stop
• Turn the engine switch off
• Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
• Driving for a few miles (kilometers), calibration will complete after 2 minutes of cumulative driving at 20 mph (32 km/h).

For more details, please watch the following video:

This tutorial is based on the Lincoln owner’s manual. This procedure should be work on the latest generation of Lincoln MKX (2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 model years). Hopefully, the article of How To Reset Lincoln MKX TPMS Tire Pressure Monitoring Sensor Light useful for you. Good Luck!