2020-2021 Toyota Supra Tire Pressure Monitor Warning Light Reset
Last Updated on May 21, 2020 by Christ
2020-2021 Toyota Supra Tire Pressure Monitor Warning Light Reset – The new Toyota Supra MKV was unveiled at the 2019 Detroit Auto Show. Based on the concept, the Toyota FT1, which also inherits some elements from the Supra MKIV, although the new Supra has a longer, sharper tube. The side skirts and the kidneys stand out, finding a rear wheel arch that guesses a more aggressive rear.
For this new generation, Toyota worked together with BMW, in which elements such as the chassis, engine, transmission, coming from the Z4 were shared, and as for tuning or software, it comes from Toyota. For this new generation, two new engines are delivered. The BMW B48B20 (4-cylinder engine, 2.0 liters, delivering 258 hp), and the BMW B58B30 (6-cylinder in-line, 3.0-liter, 355 hp).
2020-2021 Toyota Supra Tire Pressure Monitor Warning Light Reset
Time needed: 7 minutes
If you replaced a wheel, tire, TPMS sensor, etc. and are now getting a warning light on your car, then the sensor needs to be reset. Follow these steps to reset the Tire Pressure Monitoring Sensor (TPMS) light on your Toyota Supra:
- Stop the vehicle in a safe place
Turn the engine switch off and engage the parking brake.
- Adjust the tire inflation pressure recommended on the tire placard
The tire placard is located on the driver’s door pillar
- Turn the ignition switch to the “ON” position
If your vehicle has an ignition button, press the START/STOP button twice without touching the brake pedal
- Press the MENU button to enter the main menu
The button is located on the center console
- Go to MY VEHICLE > VEHICLE STATUS > TIRE PRESSURE MONITOR > TIRE SETTINGS
Tap the touchscreen or use the navigation control to select the menu
- Selecting tires
On this menu, you can choose SUMMER TIRES or WINTER TIRES/ALL-SEASON TIRES
- Current
On this step you can selecting “Other Tire” or not
- If you choose “Other Tire” go to TIRE SETTINGS
Select Other Tire if you do a tire replacement.
- Start the engine
Do not drive off!
- Select PERFORM RESET
Calibration will complete after 20 minutes of cumulative driving at 20 to 30 mph.
- If you not select “Other Tire” go to LOAD STATE > CONFIRM SETTINGS
Calibration will complete after 20 minutes of cumulative driving at 20 to 30 mph.
This tutorial is based on the Toyota owner’s manual. This procedure can be applied to the fifth generation of Toyota Supra (2019 2020 2021 model years). Hopefully, the article of 2020-2021 Toyota Supra Tire Pressure Monitor Warning Light Reset useful for you.
Leave a Reply