Subaru Impreza: How To Reset Maintenance Oil Change Light (2012-2021)

Last Updated on December 16, 2020 by Christ

Subaru Impreza: How To Reset Maintenance Oil Change Light (2012-2021) – The Subaru Impreza is a compact sedan produced by the Japanese company Subaru, which came off the assembly lines for the first time in 1992. The fourth generation of the Impreza was presented at the 2011 New York Motor Show.

The engines available are both petrol and diesel with displacements between 1.6 and 2.0 liters. Initially intended for the Japanese and US markets, the fourth series was subsequently exported to other European markets, except in Italy with the exception of the WRX and STI.

Subaru Impreza How To Reset Maintenance Oil Change Light (2012-2021)

Contents

Subaru Impreza: How To Reset Maintenance Oil Change Light (2012-2021)

When the preset maintenance period arrives, a notification screen will be displayed. You must change the corresponding maintenance item’s setting after performing an oil change or maintenance on your vehicle. Depending on your vehicle model, here are a few ways to reset the maintenance light on the 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 Subaru Impreza:

4th Generation (GJ GP)

For this fourth generation model, you can reset the maintenance light through the multi function display. There are 2 ways to do this, depending on your vehicle model year, here’s how to reset it:

2012-2014 Model Years

Time needed: 7 minutes

Follow these instructions if your vehicle is made in 2012 2013 2014:

  1. Place the ignition to the ON position without starting the engine

    If your vehicle has the keyless starting system, press the ENGINE START/STOP button twice without pressing the brake pedal

  2. Go to the SELECTION screen by using the ▲ or ▼ button

    The button is located on the steering wheel
    oil maintenance light reset

  3. Pull and hold the ⓘ/SET button to enter the menu

    Pull the button for 3 seconds

  4. Select MAINTENANCE

    Use the ▲ or ▼ button to scroll and pull ⓘ/SET to select

  5. Select MAINTENANCE SCHEDULE or ENGINE OIL

    In this menu you can set a maintenance reminder at a specific interval by adjust the Notification Date or Notification Distance

  6. Select SET when you finish setting up

    Done!

2015-2016 Model Years

  • Place the ignition to the ON position without starting the engine
  • Go to the SETTINGS screen by using the ▲ or ▼ button
oil maintenance light reset
  • Hold down the ENTER button to enter the menu
  • Select MAINTENANCE
  • Select MAINTENANCE SCHEDULE or ENGINE OIL
  • Select SET when you finish setting up

5th Generation (GK GT)

This is the latest generation of the Subaru Impreza. Just like the previous generation, you can set the maintenance minder at a specific interval through multi function display. Here’s how to do it:

  • Place the ignition to the ON position without starting the engine
  • Go to the SELECTION screen by pressing the INFO button repeatedly
  • Pull and hold the ⓘ/SET button to enter the menu
oil maintenance light reset
  • Select MAINTENANCE by using the ▲or▼ button to scroll and pull the ⓘ/SET button to select
  • Select MAINTENANCE SCHEDULE or ENGINE OIL
  • Select SET when you finish setting up

 Repeat this guide to reset Oil Filter or Tires if needed.

These instructions are based on the Subaru Impreza owner’s manual. This procedure should apply to the fourth and fifth generations of the Subaru Impreza (2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article Subaru Impreza: How To Reset Maintenance Oil Change Light (2012-2021) can solve your problem. Good Luck!

(Visited 719 times, 1 visits today)

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.