How To Reset Tire Pressure Monitoring System (TPMS) on Nissan GT-R

Last Updated on December 17, 2019 by Christ

How To Reset Tire Pressure Monitoring System (TPMS) on Nissan GT-R – Latest Nissan GT-R is expected to pave the end of next year. Carrying the new engine, the power from the new hero car from Nissan was able to catapult power 800HP. It is common knowledge if a Japanese automotive manufacturer that will immerse hybrid engines to the latest Nissan GT-R. Nissan will combine an electric engine and twin-turbo 3.8-liter V6 as the driving force. Nissan engineer said, fusion machines and the implementation of the KERS system on the latest GT-R, capable of producing an output of 800 horsepower (HP).

Car with GT-R R36 series is said to need only 2.7 seconds to reach a speed of 0-100 km per hour. The company also mentions, a car capable of racing with a maximum speed of 340 km per hour. In addition to launching the standard version of the Nissan GT-R 2015, the Japanese manufacturer is also planning for the Nissan GT-R Nismo version 2015.

How to Reset Tire Pressure Monitoring System (TPMS) on Nissan GT-R:

To reset the Tire Pressure Monitoring System (TPMS) light on your 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 Nissan GT-R, follow these steps:

  • Make sure the vehicle is at a complete stop
  • Turn the engine switch off
  • Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
  • Driving for a few miles (kilometers), calibration will complete after 20 minutes of cumulative driving at 25 mph.

If the above procedure does not work, try using the following procedure at your own risk!

Time needed: 15 minutes

  1. Adjust the tire inflation pressure recommended on the tire placard located on the door panel.

  2. Locate the TPMS interface plug. This is a white female plug that is attached to the OBD II wire loom under the dash. You may have to cut the tape that is holding the TPMS interface plug to the OBD II wire loom.

    tire pressure tpms reset

  3. Insert a paper clip or wire to the plug interface.

  4. Turn the ignition ON but do not start the engine

  5. Tap the end of the paper clip on any exposed ground (metal) 6 times.

  6. If the way you are correct, the TPMS warning light will start blinking slowly.

    If it flashes fast that’s not right. If yours isn’t flashing slowly then check your connections, turn the ignition off and start over at step 4.

  7. Once you confirm the lights do not stop flashing, driving for a few miles (kilometers), calibration will complete after 20 minutes of cumulative driving at 16-25 mph.

  8. The light will quickly come back on due to the low tire pressures. Refill your tires to the correct pressure.

For more details, please watch the following video:

We got this tutorial from Nissan specialists. The procedure above can be applied to the latest generations of Nissan GT-R (2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 model years). Hopefully the article of How To Reset Tire Pressure Monitoring System (TPMS) on Nissan GT-R useful for you.

(Visited 2,839 times, 1 visits today)

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.