How To Reset Subaru Ascent Oil Light Maintenance Minder (2019-2021)
Last Updated on December 16, 2020 by Christ
How To Reset Subaru Ascent Oil Light Maintenance Minder (2019-2021) – The Subaru Ascent is an SUV-type passenger car produced by Subaru in 2018. This car is powered by a new boxer engine called FA24.
The engine is a 2387 cm3 turbocharged 4-cylinder with opposed pistons with a compression ratio of 10.6: 1. The cylinder block and heads are made from aluminum alloy, and the cylinder heads each have two camshafts driven by a timing chain.
How To Reset Subaru Ascent Oil Light Maintenance Minder (2019-2021)
Time needed: 7 minutes
When the preset maintenance period arrives, a notification screen will be displayed. You must change the corresponding maintenance item’s setting after performing an oil change or maintenance on your vehicle. Here is how to reset the maintenance light on the Subaru Ascent:
- Place the ignition to the ON position without starting the engine
If your vehicle has the keyless starting system, press the ENGINE START/STOP button twice without pressing the brake pedal
- Go to the SETTINGS screen by using the ▲ or ▼ button
The button is located on the instrument panel
- Hold down the ENTER or VIEW/⏎ button to enter the menu
Press and hold the button for 3 seconds
- Select MAINTENANCE
Use the ▲ or ▼ button to scroll and press ENTER to select
- Select MAINTENANCE SCHEDULE or ENGINE OIL
In this menu you can set a maintenance reminder at a specific interval by adjust the Notification Date or Notification Distance
- Select SET when you finish setting up
Done!
Repeat this guide to reset Oil Filter or Tires if needed.
These instructions are based on the Subaru Ascent owner’s manual. This procedure should apply to the first generation of the Subaru Ascent (2019 2020 2021 model years). Hopefully, the article How To Reset Subaru Ascent Oil Light Maintenance Minder (2019-2021) can solve your problem. Good Luck!
Leave a Reply