How Do I Reset Service Minder Oil Life Light on Ford Transit (2006-2021)
Last Updated on October 9, 2020 by Christ
How Do I Reset Service Minder Oil Life Light on Ford Transit (2006-2021) – The Ford Transit is a large light commercial vehicle manufactured by Ford. It is available with high and low roofs, different lengths and wheelbases, van, minibus, and box body pick-up versions. You can also see the versions of Transit camperizzate.
In August 2006, a new restyling gives life to the seventh series of the Transit, which has changed both to the front and to the rear with new designs of the light groups, which take on a vertically elongated triangle shape, and of the grille. In 2007 the Transit was awarded the title of International Van of the Year.
Contents
How Do I Reset Service Minder Oil Life Light on Ford Transit (2006-2021)
Did you get a service interval indicator or an Engine Oil Change Due Next Service message on your 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 Ford Transit? This means you must immediately perform oil change on your vehicle. Don’t forget to reset the oil minder system afterward. Depending on your vehicle model, here are a few ways to reset the oil life light.
3rd Generation (2006-2013)
Time needed: 7 minutes
The third generation of Ford Transit was marketed from 2000 to 2013. In this generation you can reset the engine oil by stepping on the gas and brake pedals. Only reset the system after changing the engine oil!
- Turn on the ignition without starting the engine
If your vehicle has the keyless starting system, press the ENGINE START/STOP button once without pressing the brake pedal
- Depress the Brake and Accelerator pedals at the same time
Fully press both pedals for about 25 seconds
- Keep holding both pedals until a message confirming that the reset is complete appears on the screen
On the monochrome display models, the spanner light will blink and a beep will sound. This message confirms that the reset procedure was completed correctly.
- Release the pedals and switch off the ignition
Done!
4th Generation (2014-2021)
The fourth generation is today’s latest models, this generation was introduced since 2014. Depending on the engine type of your vehicle, here are how to reset the engine oil life on the Ford Transit fourth generation.
Gasoline Engine
Just like the previous generation, you can reset the oil life by pressing the GAS and BRAKE pedals simultaneously after turning on the ignition. Keep holding both pedals until a message confirming that the reset is complete appears on the screen and then release the pedals and switch off the ignition.
Diesel Engine
- Turn the engine switch to the “ON” position
- Find the SETTINGS menu by using the ▲▼ navigation button
- Press the menu button to display the submenu
- Select VEHICLE MAINTENANCE
- Scroll down and select OIL LIFE
- Select OIL LIFE RESET
- Press and holds the OK button until “Reset Successful” appears on the screen
These instructions are based on the Ford Transit owner’s manual. This procedure should apply to the third and fourth generation of the Ford Transit (2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article How Do I Reset Service Minder Oil Life Light on Ford Transit (2006-2021) can solve your problem. Good Luck!
Leave a Reply