Reset Guide: Peugeot 2008 Wrench Service Light (2013-2021)

Reset Guide: Peugeot 2008 Wrench Service Light (2013-2021) – The Peugeot 2008 is a compact crossover car presented at the 2013 Geneva Motor Show. Structurally based on the first generation of the 208, it is characterized by a Crossover-type bodywork entering the B segment.

The Production of the second generation began in 2019. It is longer than the previous generation, fitting into the C segment. The design incorporates some stylistic elements of the Peugeot 3008 II, notably with the signature of the taillight and the black stripe.

Reset Guide: Peugeot 2008 Wrench Service Light (2013-2021)

If you see the service indicator blinks, it means that you have to perform maintenance service on your car. You also need to reset the service interval so you know when to do the next service. Depending on your vehicle model, here are a few ways to reset the service light on Peugeot 2008:

1st Generation (2013-2018)

2nd Generation (2019-2021)

Just like the previous generation, in this generation (2019 2020 2021) you can reset the service interval using the button located on the end of the lighting control lever:

• Place the ignition to the off position
• Press and hold the reset button located on the end of the lighting control lever

• Turn on the ignition without starting the engine
• The screen will start the countdown
• Keep press the reset button until the countdown is complete
• Verify the indicator has been reset by starting the engine

These instructions are based on the Peugeot 2008 owner’s manual. This procedure should apply to the first and second generations of the Peugeot 2008 (2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article Reset Guide: Peugeot 2008 Wrench Service Light (2013-2021) can solve your problem. Good Luck!