How To Reset Oil Life Light on Mercury Monterey After Oil Change (2004-2007)
Last Updated on October 23, 2020 by Christ
How To Reset Oil Life Light on Mercury Monterey After Oil Change (2004-2007) – Mercury Monterey is a mid-range minivan car produced under the American Mercury brand from 2004. The sale ended in 2007 without a successor due to a symbolic deal.
In 2004, Mercury decided to end its long cooperation with Nissan and finished the production of the Villager model based on the Nissan Quest for the successor with the new name. Already in use in the 1950s, 1960s and 1970s, the Monterey name was brought back into service for the luxury twin version of the Ford Freestar.
How To Reset Oil Life Light on Mercury Monterey After Oil Change (2004-2007)
Time needed: 7 minutes
Did you get a Change Oil Soon or Oil Change Required message on your 2004 2005 2006 2007 Mercury Monterey? This means you must immediately perform oil change on your vehicle. Don’t forget to reset the oil minder system afterward. Depending on your vehicle model, here are a few ways to reset the oil life light.
- Turn on the ignition without starting the engine
Make sure the vehicle completely stops
- Press the SETUP button briefly until “RESET FOR SYSTEM CHECK” appears on the screen
The button is located on the instrument panel
- Press RESET button
OIL LIFE % HOLD RESET NEW will appears on the display
- Press the RESET button for 2 seconds and release
IF NEW OIL HOLD RESET message will appears on the display
- Press and hold the RESET button again to reset oil life to 100%
Done!
These instructions are based on the Mercury Monterey owner’s manual. This procedure should apply to the last generation of the Mercury Monterey (2004 2005 2006 2007 model years). Hopefully, the article How To Reset Oil Life Light on Mercury Monterey After Oil Change (2004-2007) can solve your problem. Good Luck!
Leave a Reply