How To Reset Oil Life Light Oil Change Minder on Ford F250 (2011-2021)
Last Updated on October 1, 2020 by Christ
How To Reset Oil Life Light Oil Change Minder on Ford F250 (2011-2021) – The Ford F-Series Super Duty is a family of pickup trucks, introduced in 1998 as the 1999 model year. From F-250 to F-550 Super Duty Models are assembled at the Kentucky truck plant in Louisville, Kentucky.
In September 2015, the fourth-generation Super Duty was presented. The new frame is more than 95% made of high-strength steel, increasing its rigidity 24 times. The choice of petrol engines V8 6.2 liter and 6.7 liter V8 turbodiesel.
Contents
How To Reset Oil Life Light Oil Change Minder on Ford F250 (2011-2021)
Did you get a Engine Oil Change Due Next Service or Oil Change Required message on your 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 Ford F250? This means you must immediately perform oil change on your vehicle. Don’t forget to reset the oil minder system afterward. Depending on your vehicle model, here are a few ways to reset the oil life light.
3rd Generation (2011-2016)
The third generation of Ford F250 was marketed from 2011 to 2016. There are two ways to reset the oil life in this generation. Depending on your vehicle trim level, here are how to reset the engine oil life on the Ford F250 third generation.
Display Controls Type 1
Time needed: 7 minutes
Follow these steps if your vehicle is not equipped with a multi-information display.
- Turn on the ignition without starting the engine
Make sure the vehicle completely stops
- Press the SETUP button briefly until “OIL LIFE % HOLD RESET = NEW” appears on the screen
The button is located on the steering wheel
- Press the RESET button for 2 seconds and release to reset the oil life to 100%.
Done!
Display Controls Type 2
- Turn the engine switch to the “ON” position
- Find the SETTINGS menu by using the ▲▼ navigation button on the steering wheel and press the OK button to select
- Select VEHICLE
- Select OIL LIFE RESET
- Press and holds the OK button until “Reset Successful” appears on the screen
4th Generation (2017-2021)
The fourth generation is today’s latest models, this generation was introduced since 2017. Depending on your vehicle trim level, here are how to reset the engine oil life on the Ford F250 fourth generation.
With 2″ Display Menu
- Turn the engine switch to the “ON” position
- Find the SETTINGS menu by using the navigation button and press the OK button to select
- Select VEHICLE
- Select OIL LIFE RESET
- Press and holds the OK button until “Reset Successful” appears on the screen
With 4″ Display Menu
- Turn the engine switch to the “ON” position
- Find the SETTINGS menu tab by using the navigation button
- Scroll down and select ADVANCED SETTINGS
- Select VEHICLE
- Select OIL LIFE RESET
- Press and holds the OK button until “Reset Complete” appears on the screen
With 8″ Display Menu
- Turn the engine switch to the “ON” position
- Go to the TRUCK INFO tab menu by using the ◄ ► navigation button
- Scroll down to MAINTENANCE MONITOR and press the OK button to select
- Select OIL LIFE
- Press and holds the OK button until “Reset Successful” appears on the screen
These instructions are based on the Ford F250 owner’s manual. This procedure should apply to the third and fourth generation of the Ford F250 (2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article How To Reset Oil Life Light Oil Change Minder on Ford F250 (2011-2021) can solve your problem. Good Luck!
Leave a Reply