Reset Guide: Kia Cadenza Oil Service Light (2014-2020)

Reset Guide: Kia Cadenza Oil Service Light (2014-2020) – The Kia Cadenza is a large hatchback produced by the Korean car manufacturer Kia Motors since 2009. It was born as the heir of the Opirus model.

Compared to the Opirus progenitor, the new Cadenza features a new 2.4-liter 4-cylinder Theta II petrol engine with 4-valve per cylinder. Next to the 2.4, we find the renewed 2.7 V6 Mu, which, thanks to the redesigned cylinder head and the reinforced valves, can be powered exclusively by LPG gas without losing power.

Reset Guide Kia Cadenza Oil Service Light (2014-2020)

Reset Guide: Kia Cadenza Oil Service Light (2014-2020)

The service light will appear each time you turn on the ignition when your vehicle exceeds the specified service interval. You must adjust the service interval after performed maintenance on your vehicle. Depending on your vehicle model, here are a few ways to reset the oil light on 2014 2015 2016 2017 2018 2019 2020 Kia Cadenza:

1st Generation (VG; 2014-2016)

The first generation of Kia Cadenza was marketed from 2009 to 2016. In this older generation you can reset the service light as follows:

  • Place the ignition to the ON position without starting the engine
  • Go to the ⚙️ USER SETTINGS mode by pressing the ❐ MODE button repeatedly
kia wrench service light reset
  • Select SERVICE INTERVAL by using the ▼ button to scroll and press ❐ button to select
  • Make sure to activate the service interval function by select ON
  • In this menu you can set a maintenance reminder at a specific interval by adjust the Milage or Period
  • Use the ▼ button to change the digit value. Press the ❐ button to confirm the changes.

2nd Generation (YG; 2017-2020)

Time needed: 7 minutes.

Similar to the previous generation, you can access service intervals through the User Settings menu. Here’s how to do it:

  1. Place the ignition to the ON position without starting the engine

    If your vehicle has the keyless starting system, press the ENGINE START/STOP button twice without pressing the brake pedal

  2. Go to the ⚙️ USER SETTINGS mode by pressing the ❐ MODE button repeatedly

    The button is located on the steering wheel
    kia wrench service light reset

  3. Find and select SERVICE INTERVAL

    Use the navigation switch to scroll and press OK button to enter the menu

  4. Make sure you activate the service interval function by giving a check mark

    In this menu you can set a maintenance reminder at a specific interval by adjust the Time or Distance

  5. Use the navigation switch to change the digit value. Press the OK button to confirm the changes.

    Done!

This tutorial is based on the Kia Cadenza owner’s manual. This procedure should apply to the first and second generations of Kia Cadenza (2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article Reset Guide: Kia Cadenza Oil Service Light (2014-2020) can solve your problem. Good Luck!

Tagged with: , , , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.