How To Reset Infiniti QX80 Maintenance Light After Oil Change (2014-2021)

Last Updated on November 19, 2020 by Christ

How To Reset Infiniti QX80 Maintenance Light After Oil Change (2014-2021) – The Infiniti QX80 is the top of the line in the crossover and SUV segment. This car is manufactured in Japan in Yukuhashi and Nissan Shata. It was also manufactured in St. Petersburg, Russia until 2014.

From 2004 to 2013, the car was named Infiniti QX56. The Infiniti QX80 offers a 5.6-litre V8 engine that produces 400 horsepower and 413 pound-feet of torque.

How To Reset Infiniti QX80 Maintenance Light After Oil Change (2014-2021)

Contents

How To Reset Infiniti QX80 Maintenance Light After Oil Change (2014-2021)

When the engine oil exceed the specified service interval, the maintenance reminder light will appear on the display. You should perform an oil change and reset the system. Depending on your vehicle model, here are a few ways to reset the oil light on 2014 2015 2016 2017 2018 2019 2020 2021 Infiniti QX80:

1st Facelift (2014-2017)

The first facelift of Infiniti QX80 was marketed from 2014 to 2017. There are two ways to reset the oil life in this generation. Depending on your vehicle trim level, here are how to reset the maintenance engine oil light on the Infiniti QX80:

With Cluster Display

Time needed: 7 minutes

You can reset maintenance light through information display. Follow these instructions to do it:

  1. Turn on the ignition without starting the engine

    If your vehicle has the keyless starting system, press the ENGINE START STOP button two times without depressing the brake pedal

  2. Go to SETTINGS mode by pressing the ❏ button repeatedly

    The button is located on the instrument cluster area
    nissan oil maintenance light reset

  3. In the setting mode screen press the ⚈ button to move to MAINTENANCE menu

    Press the ❏ button to select the menu

  4. Select ENGINE OIL menu

    Use the ⚈ button to highlight and the ❏ button to select

  5. Select RESET

    You can select reset or set the distance for service interval on this menu

  6. Press the ⚈ button to reset and then press ❏ button to confirm

    Repeat this guide if the OIL FILTER is needed to reset!

With Audio Display

In addition through the instrument cluster, you can reset maintenance light using the audio display. Follow these instructions to do it:

  • Turn on the ignition without starting the engine
  • Press the INFO button to display information menu
  • Scroll to MAINTENANCE menu by using navigation button and then press ENTER button to select
oil maintenance light reset
  • Select ENGINE OIL or REMINDER 1
  • Select the INTERVAL to set the maintenance at a specific interval, or select RESET DISTANCE to reset the interval

2nd Facelift (2018-2021)

The second facelift of Infiniti QX80 was marketed since 2018. This is the newest generation today. In this generation you can reset the maintenance light via the infotainment display. Here’s how to do it:

  • Turn on the ignition without starting the engine
  • Press the MENU button to display the main menu
oil maintenance light reset
  • Tap SETTINGS on the touchscreen
  • Select METER
  • Select MAINTENANCE
  • Select OIL AND FILTER
  • You can select RESET or set the distance for maintenance at a specific interval on this menu

Repeat this guide to reset Oil Filter, Tire and Other Maintenance if needed.

This tutorial is based on the Infiniti QX80 owner’s manual. This procedure should apply to the second generation of Infiniti QX80 (2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article How To Reset Infiniti QX80 Maintenance Light After Oil Change (2014-2021) can solve your problem. Good Luck!

(Visited 1,209 times, 5 visits today)

2 Comments on “How To Reset Infiniti QX80 Maintenance Light After Oil Change (2014-2021)

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.