How To Reset Infiniti QX56 Maintenance Service Oil Light (2004-2013)
Last Updated on November 17, 2020 by Christ
How To Reset Infiniti QX56 Maintenance Service Oil Light (2004-2013) – The QX56, which has been built since 2004 (renamed the QX80 in 2013) is a full-size car SUV with a total length of well over five meters. This car is based on the Nissan Armada.
The second generation of QX56 was first presented on March 31, 2010, at the New York Auto Show. In this generation, the QX56 is based on the Nissan Patrol Y62.
Contents
How To Reset Infiniti QX56 Maintenance Service Oil Light (2004-2013)
When the engine oil exceed the specified service interval, the maintenance reminder light will appear on the display. You should perform an oil change and reset the system. Depending on your vehicle model, here are a few ways to reset the oil light on 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 Infiniti QX56:
1st Generation (JA60)
The first generation of Infiniti QX56 was marketed from 2004 to 2010. There are two ways to reset the maintenance oil light in this generation. Depending on your vehicle model years, here are how to reset the maintenance engine oil light on the Infiniti QX56:
2004-2007 Model Years
Time needed: 7 minutes
Follow these instructions if your vehicle is 2004 2005 2006 2007 model years.
- Turn on the ignition without starting the engine
Make sure your vehicle is stopped
- Go to MAINTENANCE menu by pressing the TRIP button repeatedly
The button is located on the centre console
- Scroll down and select ENGINE OIL
Use the joystick to scroll and press ENTER to select
- You can reset or set the distance for service interval on this menu
Select the MAINTENANCE SCHEDULE to set the maintenance interval, or select RESET to reset the interval
2008-2011 Model Years
- Turn on the ignition without starting the engine
- Press the INFO button to display information menu
- Scroll to MAINTENANCE menu by using navigation button and then press ENTER button to select
- Select ENGINE OIL or REMINDER 1
- Select the INTERVAL to set the maintenance at a specific interval, or select RESET DISTANCE to reset the interval
2nd Generation Z62 (2011-2013)
The second generation of Infiniti QX56 was marketed from 2011 to 2013. In this generation you can reset maintenance light oil through a cluster or audio display. Here’s how to do it:
With Cluster Display
- Turn on the ignition without starting the engine
- Go to SETTINGS mode by pressing the ❏ button repeatedly
- In the setting mode screen press the ⚈ button to move to MAINTENANCE menu
- Press the ❏ button to select the menu
- Select ENGINE OIL
- You can select RESET or set the distance for maintenance at a specific interval on this menu
- Press the ⚈ button to reset and then press ❏ button to confirm
With Audio Display
- Turn on the ignition without starting the engine
- Press the INFO button to display information menu
- Scroll to MAINTENANCE menu by using navigation button and then press ENTER button to select
- Select ENGINE OIL or REMINDER 1
- Select the INTERVAL to set the maintenance at a specific interval, or select RESET DISTANCE to reset the interval
Repeat this guide to reset Oil Filter, Tire and Other Maintenance if needed.
This tutorial is based on the Infiniti QX56 owner’s manual. This procedure should apply to the first and second generations of Infiniti QX56 (2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 model years). Hopefully, the article How To Reset Infiniti QX56 Maintenance Service Oil Light (2004-2013) can solve your problem. Good Luck!
Leave a Reply