Reset Guide: GMC Yukon Oil Life Oil Change Light (2000-2021)
Last Updated on February 13, 2021 by Christ
Reset Guide: GMC Yukon Oil Life Oil Change Light (2000-2021) – The GMC Yukon is a large and displacement SUV produced by the General Motors group since the 1990s. The same platform is also used for the very similar model Chevrolet Tahoe and Cadillac Escalade and the model marketed under the GMC brand.
The second generation of the Yukon was presented for the first time in 2000, debuting in parallel with the twin Cadillac and Chevrolet models. Compared to its predecessor, the car has undergone an evolutionary direction of changes in design.
Contents
Reset Guide: GMC Yukon Oil Life Oil Change Light (2000-2021)
When the system has calculated that oil life has exceeded the specified service interval, a CHANGE ENGINE OIL SOON message will come on. You must perform an oil change on your vehicle and reset the system. Depending on your vehicle model, here are a few ways to reset the oil life light on 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 GMC Yukon:
Easiest Way
Time needed: 7 minutes
The easiest way to reset the oil life on this vehicle (2000-2021 model years) is by pressing the accelerator pedal 3 times. Here’s how to do it:
- Place the ignition to the RUN position without starting the engine
If your vehicle has the keyless starting system, hold down the ENGINE START/STOP button without pressing the brake pedal
- Fully depress the GAS pedal, three times within 5 seconds
Don’t rush, make sure you press it fully
- Turn off the ignition
Press the ENGINE START/STOP button once
- Verify the indicator has been reset by starting the engine
Done!
3rd Generation (2007-2014)
In addition to using the gas pedal, you can reset the oil life using DIC buttons on this third generation.
- Turn on the ignition without starting the engine
- Press the VEHICLE INFO button briefly until “OIL LIFE REMAINING” appears on the screen
- Press and hold the ✓ button until Oil Life 100% appears on the screen
- Verify the indicator has been reset by starting the engine
4th Generation (2015-2020)
In this fourth generation you can access the cluster menu to reset the oil life using the steering wheel buttons.
- Turn on the ignition
- Press the ◄ navigation button to enter the cluster app
- Select INFO
- Find the OIL LIFE menu by using the ▲▼ navigation button
- Press and hold the ✓ button to execute the oil life reset
5th Generation (2021)
Just like the previous generation, you can reset oil life through the cluster menu.
- Turn on the ignition
- Go to the INFO (i) menu by using the ◄ ►navigation button on the steering wheel
- Find the OIL LIFE menu by using the ▲▼ navigation button
- Press and hold the thumbwheel button to execute the oil life reset
These instructions are based on the GMC Yukon owner’s manual. This procedure should apply to the second, third, fourth, and fifth generations of the GMC Yukon (2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article Reset Guide: GMC Yukon Oil Life Oil Change Light (2000-2021) can solve your problem. Good Luck!
Leave a Reply