How Do I Reset Engine Oil Life Light On My Ford Escape (2008-2020)

How Do I Reset Engine Oil Life Light On My Ford Escape (2008-2020) – The Ford Escape is a compact SUV manufactured by Ford since 2000. In Europe, it was sold as the Ford Maverick. The latter was in production from 1993 to 2007, but it is only since 2000 that it represented the Escape’s European version.

The second series of the Ford Escape debuted at the 2006 Los Angeles Motor Show. It was also based on Ford’s CD2 platform and was equipped with Electronic Stability Control since 2008. This new series inherited some characteristic traits from the Explorer, the Edge, and the Expedition.

How Do I Reset Engine Oil Life Light On My Ford Escape (2008-2020)

Did you get a Engine Oil Change Due Next Service or Oil Change Required message on your 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 Ford Escape? This means you must immediately perform oil change on your vehicle. Don’t forget to reset the oil minder system afterward. Depending on your vehicle model, here are a few ways to reset the oil life light.

2nd Generation (2008-2012)

3rd Generation (2013-2019)

The third generation of Ford Escape was marketed from 2013 to 2019. There are two ways to reset the oil life in this generation. Depending on your vehicle trim level, here are how to reset the engine oil life on the Ford Escape third generation.

With Brake & Gas Pedal

1. Turn on the ignition without starting the engine
2. Depress the Brake and Accelerator pedals at the same time
3. Keep holding both pedals until a message confirming that the reset is complete appears on the screen
4. Release the pedals and switch off the ignition

With Steering Control Button

Follow the steps below if your vehicle is equipped with multi-information display and control buttons on the steering wheel.

• Turn the engine switch to the “ON” position
• Find the SETTINGS menu by using the ▲▼ navigation button and press the OK button to select

• Select VEHICLE
• Select OIL LIFE RESET
• Press and holds the OK button until “Reset Successful” appears on the screen

4th Generation (2020-2021)

The fouth generation is today’s latest models, this generation was introduced since 2020. Depending on your vehicle trim level, here are how to reset the engine oil life on the Ford Escape fouth generation.

With 4 Inch Display Menu

• Turn the engine switch to the “ON” position
• Find the INFORMATION menu by using the ▲▼ navigation button

• Press the menu button to display the submenu
• Scroll down and select OIL LIFE
• Select OIL LIFE RESET
• Press and holds the OK button until “Reset Successful” appears on the screen

With 6 and 12 Inch Display Menu

1. Turn the engine switch to the “ON” position
2. Press the menu button to enter the main menu
3. Find the SETTINGS menu by using the ▲▼ navigation button and press the OK button to select
4. Select OIL LIFE RESET
5. Press and holds the OK button until “Reset Successful” appears on the screen

These instructions are based on the Ford Escape owner’s manual. This procedure should apply to the second, third and fourth generations of the Ford Escape (2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article How Do I Reset Engine Oil Life Light On My Ford Escape (2008-2020) can solve your problem. Good Luck!