Reprogram Tire Pressure TPMS Sensor on 2011-2016 Ford Fiesta

Reprogram Tire Pressure TPMS Sensor on 2011-2016 Ford Fiesta – This American-made car has become the favorite cars in recent years. The car is designed with high technology is also sold millions of units worldwide since it has a high design and technology that are highly sought after by lovers of American cars. In addition, some features with advanced technology more attractive design and the latest innovations developed by the company Ford, especially for young people who want style with a good car sedan Ford is one of the best reference to have.

Latest Fiesta has several types and tailored to your needs. One of the innovations made by Ford for this car is not having luggage, therefore if you include people who like to carry a lot of stuff this car is not the best choice. The capacity of this car is only enough for 4 people with some technological features such as audio equipment that can be directly connected to the gadgets we have. In addition, some of the advantages of the Ford Fiesta to meet the needs for the rider who is very crazy to be advanced technology.

Reset Tire Pressure TPMS Sensor on 2011-2016 Ford Fiesta :

If you receive a low-tire pressure monitoring system (TPMS) warning light while driving and you want to clear or turning off the warning light on your 2011 2012 2013 2014 2015 2016 Ford Fiesta, follow these instructions:

  • Make sure the vehicle is at a complete stop
  • Turn the engine switch off
  • Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
  • Driving for a few miles (kilometers), calibration will complete after 2 minutes of cumulative driving at 20 mph (32 km/h).

If you replaced a wheel, tire, TPMS sensor etc. and are now getting a warning light on your car, then the sensor need to be reset. For that you need to purchase the correct TPMS reset tool and follow these instructions:

  • Stop the vehicle in a safe place and turn the engine switch off and engage the parking brake.
  • Press and release the brake pedal.
  • Turn the ignition from OFF to ON position three (3) times ending in the on position without starting the engine.
    • If your car has Smart key button, press once to turn on, then press again to put vehicle into ACC mode, then press again to turn vehicle off. Repeat 2 more times, ending in ACC mode.
  • Press the brake pedal again for 2 seconds, then release.
  • Turn the ignition to OFF position (DO NOT remove the key)
  • Turn the ignition from OFF to ON position three (3) times ending in the on position without starting the engine.
  • If the reset mode has been entered successfully, the horn will sound once.
  • Starting from the driver’s side front tire, place the relearn tool against the tire sidewall, near the valve stem. Then press the button to activate the TPMS sensor.
  • Repeat the procedure on the right-front tire, the right rear tire, and the last one left rear tire.
  • A horn chirp confirms that the sensor identification code has been matched to this tire and wheel position.
  • After hearing the confirming horn chirp for the left rear tire, training is completed and and a message is shown in the information display.Turn ignition to OFF position. Adjust all tires to pressure listed on tire placard.

For more details, please watch the following video:

This procedure should be work on latest generation of Ford Fiesta (2011 2012 2013 2014 2015 2016) models. Hopefully the article of Reprogram Tire Pressure (TPMS) on 2011-2016 Ford Fiesta  usefull for you. Good Luck!

(Visited 5,379 times, 3 visits today)
Tagged with: , ,

Leave a Reply

Your email address will not be published. Required fields are marked *