Peugeot 5008: How To Reset Service Reminder Light (2012-2021)
Last Updated on May 20, 2021 by Christ
Peugeot 5008: How To Reset Service Reminder Light (2012-2021) – The Peugeot 5008 is an upper-middle-range car, produced in 2009 by the French car manufacturer Peugeot. In September 2016, the second generation was presented, on sale since spring 2017.
Very shortly after the launch of the Peugeot 3008, the new Peugeot 5008 built on the same platform was positioned as a minivan to be placed one step above the SUV 3008 in the range of the transalpine manufacturer. The new car is no longer a minivan but becomes an SUV crossover.
Contents
Peugeot 5008: How To Reset Service Reminder Light (2012-2021)
If you see the service indicator blinks, it means that you have to perform maintenance service on your car. You also need to reset the service interval so you know when to do the next service. Depending on your vehicle model, here are a few ways to reset the service light on Peugeot 5008:
1st Generation (2012-2016)
Time needed: 3 minutes
In this first generation (2012 2013 2014 2015 2016), you can reset the service interval using the Trip button in the cluster. Follow these step:
- Place the ignition to the off position
Make sure your vehicle is stopped in a safe place
- Press and hold the 🔧 000 button
The button is located on the cluster
- Turn on the ignition without starting the engine
The screen will start the countdown
- Keep press the 🔧 000 button until the countdown is complete
Release the button when the display shows “=0”
- Verify the indicator has been reset by starting the engine
Done!
2nd Generation
There are 2 ways to reset the service reminder light in this second generation. Depending on the year of your vehicle, here’s how to do it:
2017-2019 Model Years
- Place the ignition to the off position
- Press and hold the 🔧 000 button located on the instrument cluster
- Turn on the ignition without starting the engine
- The screen will start the countdown
- Keep press the 🔧 000 button until the countdown is complete
- Verify the indicator has been reset by starting the engine
2020-2021 Model Years
- Place the ignition to the off position
- Press and hold the reset button located on the end of the wiper control lever
- Turn on the ignition without starting the engine
- The screen will start the countdown
- Keep press the reset button until the countdown is complete
- Verify the indicator has been reset by starting the engine
These instructions are based on the Peugeot 5008 owner’s manual. This procedure should apply to the first and second generations of the Peugeot 5008 (2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article Peugeot 5008: How To Reset Service Reminder Light (2012-2021) can solve your problem. Good Luck!
Leave a Reply