How To Perform Oil Change Minder Oil Life Reset on Ford F350 (2011-2020)
Last Updated on October 3, 2020 by Christ
How To Perform Oil Change Minder Oil Life Reset on Ford F350 (2011-2020) – In September 2015, the fourth generation of Ford F350 Super Duty was introduced. The Ford F350 Super Duty is the brother of America’s best-selling cars, the Ford F-150.
The Super Duty Series F-250, F-350, and F-450 are specially designed to transport and tow essential items. The 2016 Super Duty is available with two engine options: a 6.2-liter 8-cylinder petrol engine and a 6.7-liter 8-cylinder Power Stroke turbodiesel.
Contents
How To Perform Oil Change Minder Oil Life Reset on Ford F350 (2011-2020)
Did you get a Engine Oil Change Due Next Service or Oil Change Required message on your 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 Ford F350? This means you must immediately perform oil change on your vehicle. Don’t forget to reset the oil minder system afterward. Depending on your vehicle model, here are a few ways to reset the oil life light.
3rd Generation (2011-2016)
The third generation of Ford F350 was marketed from 2011 to 2016. There are three ways to reset the oil life in this generation. Depending on your vehicle trim level, here are how to reset the engine oil life on the Ford F350 third generation.
Display Controls Type 1
Time needed: 7 minutes
Follow the steps below if your vehicle is equipped with multi-information display and control buttons on the steering wheel.
- Turn the engine switch to the “ON” position
If your vehicle has the keyless starting system, press the ENGINE START STOP button without pressing the brake pedal
- Press the ▲▼ navigation button briefly to find the SETTINGS menu and press the OK button to select
The button is located on the steering wheel
- Scroll to OIL LIFE RESET
Press the right navigation button to enter the sub-menu
- Press and holds the OK button until “Reset Successful” appears on the screen
The remaining oil life display will changes to 100%
Display Controls Type 2
After turning on the ignition without starting the engine, press the SETUP button repeatedly until the “OIL LIFE % HOLD RESET = NEW” appears on the screen. Press and hold the RESET button for 2 seconds and release to reset the oil life to 100%.
With Brake & Gas Pedal
If you can’t do the two methods above, please try the steps below.
- Turn on the ignition without starting the engine
- Depress the Brake and Accelerator pedals at the same time
- Keep holding both pedals until a message confirming that the reset is complete appears on the screen
- Release the pedals and switch off the ignition
4th Generation (2017-2021)
The fourth generation is today’s latest models, this generation was introduced since 2017. Depending on your vehicle trim level, here are how to reset the engine oil life on the Ford F350 fourth generation.
With 2″ Display Menu
- Turn the engine switch to the “ON” position
- Find the SETTINGS menu by using the navigation button and press the OK button to select
- Select VEHICLE
- Select OIL LIFE RESET
- Press and holds the OK button until “Reset Successful” appears on the screen
With 4″ Display Menu
- Turn the engine switch to the “ON” position
- Find the SETTINGS menu tab by using the navigation button
- Scroll down and select ADVANCED SETTINGS
- Select VEHICLE
- Select OIL LIFE RESET
- Press and holds the OK button until “Reset Complete” appears on the screen
With 8″ Display Menu
- Turn the engine switch to the “ON” position
- Go to the TRUCK INFO tab menu by using the ◄ ► navigation button
- Scroll down to MAINTENANCE MONITOR and press the OK button to select
- Select OIL LIFE
- Press and holds the OK button until “Reset Successful” appears on the screen
These instructions are based on the Ford F350 owner’s manual. This procedure should apply to the third and fourth generation of the Ford F350 (2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 model years). Hopefully, the article How To Perform Oil Change Minder Oil Life Reset on Ford F350 (2011-2020) can solve your problem. Good Luck!
Leave a Reply