How To Perform Oil Change Light Reset on 2011-2018 Lincoln MKX
Last Updated on October 29, 2020 by Christ
How To Perform Oil Change Light Reset on 2011-2018 Lincoln MKX – The Lincoln MKX is a luxury mid-size crossover car produced by Lincoln from 2007 to 2018. The MKX is a badge engineering version of the Ford Edge and is built on Ford’s CD3 platform.
The MKX has a five-door crossover body. The model is equipped with a monocoque structure and is front-wheel drive. The MKX has a 3.5-liter V6 Duratec twin-shaft engine coupled with a six-speed automatic gearbox.
How To Perform Oil Change Light Reset on 2011-2018 Lincoln MKX
Time needed: 7 minutes
Did you get a Change Engine Oil Soon or Oil Change Required message on your 2011 2012 2013 2014 2015 2016 2017 2018 Lincoln MKX? This means you must immediately perform oil change on your vehicle. Don’t forget to reset the oil minder system afterward. Depending on your vehicle model, here are a few ways to reset the oil life light.
- Turn the engine switch to the “ON” position
If your vehicle has the keyless starting system, press the ENGINE START STOP button without pressing the brake pedal
- Go to the SETTINGS menu by using the navigation button
The button is located on the steering wheel
- Find and select VEHICLE
Use the navigation button to scroll and press the OK button to select
- Scroll down to OIL LIFE
Press OK button to enter
- Press and hold the OK button until “Reset Successful” appears on the screen
The remaining oil life display will changes to 100%
These instructions are based on the Lincoln MKX owner’s manual. This procedure should apply to the first and second generation of the Lincoln MKX (2011 2012 2013 2014 2015 2016 2017 2018 model years). Hopefully, the article How To Perform Oil Change Light Reset on 2011-2018 Lincoln MKX can solve your problem. Good Luck!
Leave a Reply