How Do I Reset Nissan Serena Airbag Warning Light (2005-2020)

Last Updated on February 16, 2020 by Christ

How Do I Reset Nissan Serena Airbag Warning Light (2005-2020) – The Nissan Serena is a large car produced by the Japanese Nissan Motorhome since 1991. The first was produced until 1999, the second was from 1999 to 2005 and the third since 2005. It is a large van, which can accommodate up to eight people, produced in the Spanish Nissan factories in Barcelona, marketed in 1991 and competing with another large van of that period, Renault Espace, beyond the GM Pontiac Transporter, Toyota Previa, and Chrysler Voyager.

In Italy, however, the car was marketed from 1993 to 2000 and was introduced with engines starting from the small 1.6 16 petrol valves from about 97 horsepower to the most powerful 2.0 of 126 hp, always 16 valves. In November 1999, after a moderate sales success, the second series was presented, and at the same time removed from the lists of some countries, including the Italian ones. The Nissan Serena continues to be produced in its third version, introduced in 2004.

How Do I Reset Nissan Serena Airbag Warning Light (2005-2020)

Contents

How Do I Reset Nissan Serena Airbag Warning Light (2005-2020)

Time Needed : 7 minutes

If you receive an srs airbag warning light while driving and you want to clear or turning off the warning light on your Nissan Serena, follow these instructions:

  1. Turn the ignition key to the ON position without starting the engine

    If your vehicle has a Smart key button, press the “Start” button twice without touching the brake pedal.

  2. Watch the airbag light closely. It will stay on for a few secs. and then as soon as it blinks off (the start of the flashing), turn the ignition OFF instantly.

  3. Wait for more than 3 seconds

  4. Repeat steps 1-3 two more times until you have done the cycle three times.

  5. Now turn the key on and watch the light. It will start blinking in a different, slower manner.

    This is a diagnostic mode. You can watch this for a little while, no hurry.

  6. Now turn the ignition OFF again, wait for more than 3 seconds like in step 3 again, and turn ON back again.

  7. Turn the ignition off and then start the engine to verify the indicator has been reset

Tools
  • No Tool
Materials
  • Nissan Serena

For more details, please watch the following video:

This tutorial is based on the Nissan manual guide. If the procedure worked, the airbag light will not be flashing. This procedure should apply to all models of Nissan Serena (2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 model years). Hopefully, the article of How Do I Reset Nissan Serena Airbag Warning Light (2005-2020) useful for you. Good Luck!

Name
Comment
(Visited 1,045 times, 1 visits today)

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.