2007-2021 Nissan Murano Maintenance Oil Light Reset Guide

Last Updated on November 4, 2020 by Christ

2007-2021 Nissan Murano Maintenance Oil Light Reset Guide – The Nissan Murano is a midsize SUV manufactured by Nissan in December 2002. It was only marketed in Europe in 2004 and made available in a single version.

The second generation of the Nissan Murano is equipped with a 3.5-liter engine. This generation available in the Acenta and Tekna trims levels. It features a dual hydraulic circuit braking system with brake booster, ABS, BAS, EBD.

2007-2021 Nissan Murano Maintenance Oil Light Reset Guide

Contents

2007-2021 Nissan Murano Maintenance Oil Light Reset Guide

When the engine oil exceed the specified service interval, the maintenance minder light will appear on the display. You should perform an oil change and reset the system. Depending on your vehicle model, here are a few ways to reset the oil light on 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 Nissan Murano.

4th Generation (2007-2014)

The first generation of Nissan Murano was marketed from 2007 to 2014. There are two ways to reset the oil life in this generation. Depending on your vehicle model year, here are how to reset the maintenance engine oil light on the Nissan Murano:

With Audio Display 1

Time needed: 7 minutes

Follow these instructions if your vehicle is 2007 2008 model years.

  1. Turn on the ignition without starting the engine

    Make sure your vehicle is stopped

  2. Go to MAINTENANCE menu by pressing the MAINT button or the TRIP button briefly

    The button is located on the centre console
    nissan maintenance oil light reset

  3. Scroll down and select ENGINE OIL

    Use the joystick to scroll and press ENTER to select

  4. You can reset or set the distance for service interval on this menu

    Select the MAINTENANCE SCHEDULE to set the maintenance interval, or select RESET to reset the interval

With Audio Display 2

Follow these instructions if your vehicle is 2009 2010 2011 2012 2013 2014 model years.

  • Turn on the ignition without starting the engine
  • Press the INFO button to display information menu
nissan oil maintenance light reset
  • Scroll to the MAINTENANCE menu by using navigation button and then press ENTER button to select
  • Select ENGINE OIL or REMINDER 1
  • Select the INTERVAL to set the maintenance at a specific interval, or select RESET DISTANCE to reset the interval

5th Generation (2015-2021)

The fifth generation is today’s latest models, this generation was introduced since 2015. Here’s how to reset the maintenance oil and filter light on the latest generation of Nissan Murano:

  • Press the ENGINE START STOP button two times without depressing the brake pedal
  • Go to the ⚙️ SETTINGS menu by using the ◄ ► navigation button
nissan maintenance oil light reset
  • Scroll down to the MAINTENANCE by using the ▲▼ navigation button and press OK button to enter
  • Select OIL AND FILTER
  • You can set an engine oil reminder at a specific interval or select RESET on this menu
  • When a confirmation message appears, select YES to execute the oil reset

Repeat this guide to reset Tire or Other Maintenance if needed.

This tutorial is based on the Nissan Murano owner’s manual. This procedure should apply to the fourth and fifth generations of Nissan Murano (2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article 2007-2021 Nissan Murano Maintenance Oil Light Reset Guide can solve your problem. Good Luck!

(Visited 509 times, 1 visits today)

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.