2009-2014 Nissan Cube Maintenance Minder Wrench Light Reset Guide
Last Updated on November 2, 2020 by Christ
2009-2014 Nissan Cube Maintenance Minder Wrench Light Reset Guide – The Nissan Cube is a small minivan produced by the Japanese carmaker Nissan Motor between 1998 and 2019. The Cube was made in three series; only the latter was imported into Europe (from 2009 after being presented at the Geneva Motor Show until 2014).
The third generation made its debut at the Los Angeles Motor Show in 2008. This is the first time that the Cube has been exported outside Asia. In Europe, it will no longer be imported from 2014 due to low sales.
2009-2014 Nissan Cube Maintenance Minder Wrench Light Reset Guide
Time needed: 7 minutes
When the engine oil exceed the specified service interval, the maintenance reminder light will appear on the display. You should perform an oil change and reset the system. Here is how to reset the wrench light on 2009 2010 2011 2012 2013 2014 Nissan Cube.
- Turn on the ignition without starting the engine
If your vehicle has the keyless starting system, press the ENGINE START STOP button two times without depressing the brake pedal
- As soon as the symbol appears, press and hold the TRIP button until light blinks
The button is located on the instrument cluster
- Press the TRIP button briefly to increase the interval distance
Each press increases the interval distance by 1,000 km (500 miles)
- Wait until light stop blinks
The display will returns to the previous mode and the new interval is set
- Turn off the ignition and then start the engine to verify the maintenance minder light has been reset
Done!
This tutorial is based on the Nissan Cube owner’s manual. This procedure should apply to the third generation of Nissan Cube (2009 2010 2011 2012 2013 2014 model years). Hopefully, the article 2009-2014 Nissan Cube Maintenance Minder Wrench Light Reset Guide can solve your problem. Good Luck!
Leave a Reply