Lexus RC: How To Reset Maintenance Required Warning Light (2015-2021)
Last Updated on June 19, 2021 by Christ
Hey, What’s up, everybody! Today, I will show you how to reset the maintenance required warning light on my Lexus RC 350, but this doesn’t have to be a Lexus RC350. This could be Lexus RC education because this can also be applied to the Lexus RC F, RC200t, RC300, and RC300h, which have the same engine and system.
My 2018 Lexus RC350 tells me that maintenance is required, and after an oil change, I need to reset it. This car actually has two maintenance reminders. One of them will be on the cluster display, and the other is on the navigation screen.
Contents
How To Reset Maintenance Required Light On Lexus RC
Warning! Please note your vehicle model. This procedure applies to the Lexus RC F RC200t RC300 RC300h RC350 (2015 2016 2017 2018 2019 2020 2021 model years).
With Cluster Display
Okay, so once you’re done with the oil change, you should reset the scheduled maintenance. In this chapter, you will use the keypad on the steering wheel here to reset it.
For 2015-2017
- Turn on your car without starting up
- Press the ❏ button (only for sport cluster)
- Press the ► button until you get to the ⚙️ Settings menu
- Now press the center button on setting tab to enter the menu
- Find and select the MAINTENANCE SYSTEM
- Select YES to execute the maintenance reset
For 2018-2021
Time needed: 3 minutes
This method is the same as the previous model, the only difference is that you have to go to the Vehicle Settings menu. Here’s how to do it:
- Place the ignition to the on position
Keep foot away from brake and press Start button 2 times
- Press the ❏ button (only for sport cluster)
Press the ❏ button to move the main meter to the right
- Go to the ⚙️ SETTINGS
Scroll over by using directional pad on the right-hand side of the steering wheel and look for the gear symbol
- Press the center button
Now press the center button on Setting to enter the menu
- Find the VEHICLE SETTINGS
Go down until reach to the Vehicle Settings and the press center button to enter the menu
- Scroll down and select the OIL MAINTENANCE or SCHEDULE MAINTENANCE
Highlight to the maintenance and then press center button to select
- Select YES
When the system ask you Do You Want Initialize? Select Yes to continue reset
In this chapter I will explain how to reset the maintenance light using the navigation screen and touchpad in the center console.
- Turn on your car without starting
- Hit the MENU button and that’s gonna bring you into the main menu
- Use the touchpad to go over to the SETUP
- Find and select the VEHICLE
- Select MAINTENANCE
- You can reset maintenance interval such as Engine Oil, Oil Filter or Tire Rotation in this menu. Select a maintenance item and follow the on-screen instructions to reset it.
So that’s all you need to do, and then you’re good to go. So thanks for reading, guys, and I hope this content was helpful. If you have any questions, please leave them in the comment section below. Enjoy your weekend!
Leave a Reply