2017-2021 Kia Niro Wrench Service Light Reset Guide
Last Updated on January 7, 2021 by Christ
2017-2021 Kia Niro Wrench Service Light Reset Guide – The Kia Niro is a passenger car produced by the Korean car manufacturer Kia Motors since 2016. This crossover SUV, equipped with a plug hybrid system, was launched in the UK in late 2017 and the US in early 2018.
Mechanically it is based on the Hyundai Ioniq. It features a 105 hp 1.6-liter heat engine, coupled with a 6-speed dual-clutch gearbox to which a 44 hp electric motor is connected.
2017-2021 Kia Niro Wrench Service Light Reset Guide
Time needed: 7 minutes
The service light will flash each time you turn on the ignition when your vehicle exceeds the specified service interval. The service interval must be adjusted after performed maintenance on your vehicle. Here is how to reset the service light on 2017 2018 2019 2020 2021 Kia Niro:
- Place the ignition to the ON position without starting the engine
If your vehicle has the keyless starting system, press the ENGINE START/STOP button twice without pressing the brake pedal
- Go to the ⚙️ USER SETTINGS mode by pressing the ❐ MODE button repeatedly
The button is located on the steering wheel
- Find and select SERVICE INTERVAL
Use the navigation switch to scroll and press OK button to enter the menu
- Make sure you activate the service interval function by giving a check mark
In this menu you can set a maintenance reminder at a specific interval by adjust the Time or Distance
- Use the navigation switch to change the digit value. Press the OK button to confirm the changes.
Done!
This tutorial is based on the Kia Niro owner’s manual. This procedure should apply to the first generation of Kia Niro (2017 2018 2019 2020 2021 model years). Hopefully, the article 2017-2021 Kia Niro Wrench Service Light Reset Guide can solve your problem. Good Luck!
Leave a Reply