2015-2017 KIA Borrego Oil Service Light Reset Guide
Last Updated on January 10, 2021 by Christ
2015-2017 KIA Borrego Oil Service Light Reset Guide – The Kia Borrego is a large sport utility vehicle, produced by the Korean car manufacturer Kia Motors since 2008. The Borrego name is used in the main American markets, while in Asia, the car was imported using the Kia Mohave name.
The car was available with a 3.0 CRDI V6 turbodiesel belonging to the S engine family equipped with common rail direct injection, variable geometry turbine, and 4-valve per cylinder distribution for 24 total valves delivering 250 horsepower. The 3.0 diesel is combined with a 5-speed automatic gearbox.
2015-2017 KIA Borrego Oil Service Light Reset Guide
Time needed: 7 minutes
The service light will flash each time you turn on the ignition when your vehicle exceeds the specified service interval. The service interval must be adjusted after performed maintenance on your vehicle. Here is how to reset the service light on 2015 2016 2017 KIA Borrego:
- Place the ignition to the ON position without starting the engine
If your vehicle has the keyless starting system, press the ENGINE START/STOP button twice without pressing the brake pedal
- Go to the ⚙️ USER SETTINGS mode by pressing the ❐ MODE button repeatedly
The button is located on the steering wheel
- Find and select SERVICE INTERVAL
Use the navigation switch to scroll and press OK button to enter the menu
- Make sure you activate the service interval function by giving a check mark
In this menu you can set a maintenance reminder at a specific interval by adjust the Time or Distance
- Use the navigation switch to change the digit value. Press the OK button to confirm the changes.
Done!
This tutorial is based on the Kia Borrego owner’s manual. This procedure should apply to the first generation of Kia Borrego (2015 2016 2017 model years). Hopefully, the article 2015-2017 KIA Borrego Oil Service Light Reset Guide can solve your problem. Good Luck!
Leave a Reply