2013-2016 Hyundai Genesis Wrench Service Light Reset Guide
Last Updated on December 31, 2020 by Christ
2013-2016 Hyundai Genesis Wrench Service Light Reset Guide – The Hyundai Genesis is a sedan produced by the Korean car manufacturer Hyundai since 2008 in two generations. The second series was presented in December 2013.
The Genesis is available with two Lambda engines: 3.3 and 3.8 liters V6 capable of 268 and 300 horsepower and a 4.6 liter V8 τ Tau with 381 horsepower. All petrol-powered engines feature variable CVVT valve timing.
2013-2016 Hyundai Genesis Wrench Service Light Reset Guide
Time needed: 7 minutes
The service light will flash each time you turn on the ignition when your vehicle exceeds the specified service interval. The service interval must be adjusted after performed maintenance on your vehicle. Here is how to reset the service light on 2013 2014 2015 2016 Hyundai Genesis:
- Place the ignition to the ON position without starting the engine
If your vehicle has the keyless starting system, press the ENGINE START/STOP button twice without pressing the brake pedal
- Go to the ⚙️ USER SETTINGS mode by pressing the ❐ MODE button repeatedly
The button is located on the steering wheel
- Find and select SERVICE INTERVAL
Use the navigation switch to scroll and press OK button to enter the menu
- Make sure you activate the service interval function by giving a check mark
In this menu you can set a maintenance reminder at a specific interval by adjust the Time or Distance
- Use the navigation switch to change the digit value. Press the OK button to confirm the changes.
Done!
These instructions are based on the Hyundai Genesis owner’s manual. This procedure should apply to the first generation of the Hyundai Genesis (2013 2014 2015 2016 model years). Hopefully, the article 2013-2016 Hyundai Genesis Wrench Service Light Reset Guide can solve your problem. Good Luck!
Leave a Reply