How To Reset Nissan Almera SRS Airbag Warning Light

Last Updated on February 16, 2020 by Christ

How To Reset Nissan Almera SRS Airbag Warning Light – The Nissan Pulsar or Almera is a C-segment passenger car produced by Japanese manufacturer Nissan since 1978. It is a five-seater with a front-engine and front-wheel drive or four-wheel drive. In Europe, the Pulsar was replaced in 2004 by the Nissan Tiida. The Nissan Langley is a more equipped and powerful version than the standard Pulsar. Some generations of the Pulsar with body sedan were also called and continue to be called Nissan Bluebird Sylphy, Nissan Liberta Villa, Nissan Almera Classic or Samsung SM3.

In different markets, the Pulsar also carried the names Nissan Sentra or Nissan Sunny, which in much of the world are totally different models (Series B instead of Series N). According to the generation, the Pulsar existed with hatchback bodies of three or five doors, a sedan of four doors, a family of three or five doors, a fastback of two or four doors, a coupé of two doors, convertible of two doors and minivan of five doors.

How To Reset Nissan Almera SRS Airbag Warning Light

Contents

How To Reset Nissan Almera SRS Airbag Warning Light

Time Needed : 7 minutes

If you receive an srs airbag warning light while driving and you want to clear or turning off the warning light on your Nissan Almera, follow these instructions:

  1. Turn the ignition key to the ON position without starting the engine

    If your vehicle has a Smart key button, press the “Start” button twice without touching the brake pedal.

  2. Watch the airbag light closely. It will stay on for a few secs. and then as soon as it blinks off (the start of the flashing), turn the ignition OFF instantly.

  3. Wait for more than 3 seconds

  4. Repeat steps 1-3 two more times until you have done the cycle three times.

  5. Now turn the key on and watch the light. It will start blinking in a different, slower manner.

    This is a diagnostic mode. You can watch this for a little while, no hurry.

  6. Now turn the ignition OFF again, wait for more than 3 seconds like in step 3 again, and turn ON back again.

  7. Turn the ignition off and then start the engine to verify the indicator has been reset

Tools
  • No Tool
Materials
  • Nissan Almera

For more details, please watch the following video:

https://www.youtube.com/watch?v=AurTy602AWg

This tutorial is based on the Nissan manual guide. If the procedure worked, the airbag light will not be flashing. This procedure should apply to all models of Nissan Almera (2003 2004 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020). Hopefully, the article How To Reset Nissan Almera SRS Airbag Warning Light useful for you. Good Luck!

Name
Comment
(Visited 1,216 times, 1 visits today)

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.