How to Reset Nissan Rogue Liftgate Trunk Back Door

Last Updated on December 16, 2019 by Christ

How to Reset Nissan Rogue Power Liftgate Trunk Back Door – Driving with Rogue, feels good, feels right steering system is not too light. Driving is more fun than competitors such as the Toyota RAV4, Chevrolet Equinox, and Honda CR-V. Nissan itself makes the vehicle technology in order to remain comfortable ride on the road, including the pinning feature Active Trace Control with brake inside and outside so that the vehicle remains stable, Active Engine Braking, Hill Start Assist and optional all-wheel drive with Hill Descent Control.

There are also features Active Ride Control system, which will be activated when the vehicle brakes, set the torque of the car, thereby reducing body roll and vibration of the vehicle. Overall is a good vehicle, although the driver did not understand the advanced features are pinned on this vehicle, this car still feels good to drive. The suspension feels soft when running on asphalt. The brake system of the linear and solid pedal also feels good to climb a hill. Very simple and easy to maneuver in the city, feels comfortable and smooth on the outside of town. There is a balance in driving or handling balance that has been pinned completely on this vehicle.

How to Reset Nissan Rogue Liftgate Trunk Back Door:

Time needed: 3 minutes

If you have any issue with the Liftgate / Trunk Door and want to reset it, you can be set to open to a specific height by performing the following:

  1. Open the liftgate using the switch or the Intelligent Key.

  2. Pull the liftgate down to the desired position and hold the liftgate (the liftgate will have some resistance when being manually adjusted).

  3. While holding the liftgate in position, press and hold the liftgate switch located on the liftgate until 3 beeps are heard.

  4. The liftgate will open to the selected position setting.

For more details, please watch the following video:

This tutorial is based on the Nissan owner’s manual. Repeat steps 1-3 for setting the position of the liftgate if you want to change the position of the liftgate. The procedure above can be applied to the latest generations of Nissan Rogue (2012 2013 2014 2015 2016 2017 2018 2019 2020 model years). Hopefully, the article How to Reset Nissan Rogue Liftgate Trunk Back Door useful for you.

(Visited 9,185 times, 1 visits today)

4 Comments on “How to Reset Nissan Rogue Liftgate Trunk Back Door

  1. my nissan rogue 2017 doesn’t have power lift gate inside the car how can i reset whit fob. i can only open with hand no power lift gate inside

  2. Considering I have basically the same issue as that above ,which hasn’t been answered, I have little hope of a resolution. Just bought 2018 Rogue & had to charge car battery, now smart key fob won’t open the tailgate. Gate responds with opening sounds , then quickly locks back without moving. Have tried all suggestions, incl. holding gate button for 4/5 beeps. Mine only beeps twice no matter how many times I try. I also have no inside panel Off/ON switch/button Trying to read manual (4 books) is ridiculous, considering I’m 72+ and wish I had never got this 2018 Nissan Rogue Sport. Hoping there will be a response.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.