How To Reset Nissan Quest TPMS Tire Pressure Light (2003-2017)

Last Updated on December 17, 2019 by Christ

How To Reset Nissan Quest TPMS Tire Pressure Light (2003-2017) – Nissan, the Japanese automaker has officially announced the latest prices of its products the Nissan Quest. Model Quest itself actually using VQ DOHC six-cylinder engine with a capacity of 3,500 ccs. The machine is able to issue a power of 260 horsepower and 240 lb-ft of torque combined with the Xtronik CVT transmission system, so as to provide a comfortable driving experience for the driver.

Nissan Quest is available in four variants, namely S, VS, SL, and LE. Overall from the variant equipped with Nissan Intelligent Key with Push Button Ignition and one-touch sliding doors. With one-touch mode, then access is obtained to get to the second row and the third will be easier. Nissan Quest itself is priced starting at $ 25,990.

How To Reset Nissan Quest TPMS Tire Pressure Light (2003-2017)

How To Reset Nissan Quest TPMS Tire Pressure Light (2003-2017):

To turning off the Tire Pressure Monitoring System (TPMS) light on your 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 Nissan Quest, follow these steps:

  • Make sure the vehicle is at a complete stop
  • Turn the engine switch off
  • Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
  • Driving for a few miles (kilometers), calibration will complete after 20 minutes of cumulative driving at 25 mph.

If the above procedure does not work, try using the following procedure at your own risk!

Time needed: 10 minutes

  1. Adjust the tire inflation pressure recommended on the tire placard located on the door panel.

  2. Locate the TPMS interface plug. This is a white female plug that is attached to the OBD II wire loom under the dash. You may have to cut the tape that is holding the TPMS interface plug to the OBD II wire loom.

    tire pressure tpms reset

  3. Insert a paper clip or wire to the plug interface.

  4. Turn the ignition ON but do not start the engine

  5. Tap the end of the paper clip on any exposed ground (metal) 6 times.

  6. If the way you are correct, the TPMS warning light will start blinking slowly.

    If it flashes fast that’s not right. If yours isn’t flashing slowly then check your connections, turn the ignition off and start over at step 4.

  7. Once you confirm the lights do not stop flashing, driving for a few miles (kilometers), calibration will complete after 20 minutes of cumulative driving at 16-25 mph.

  8. The light will quickly come back on due to the low tire pressures. Refill your tires to the correct pressure.

For more details, please watch the following video:

This tutorial is based on a Nissan specialist. The procedure above can be applied to the latest generations of Nissan Quest (2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 model years). Hopefully the article of How To Reset Nissan Quest TPMS Tire Pressure Light (2003-2017) useful for you.

(Visited 8,226 times, 1 visits today)

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.