How to Reset Nissan Frontier TPMS Tire Pressure Light Without Scan Tool
Last Updated on December 17, 2019 by Christ
How to Reset Nissan Frontier TPMS Tire Pressure Light Without Scan Tool – Are you a real man who has the spirit of adventure and has a high spirit? If so, then check out one of the reasons Pickup Trucks vehicles 4 × 4 mainstays of Nissan, the Nissan Frontier. 4×4 car which has another name Nissan Navara went on sale in 1998 as the successor of the D21 Nissan Hardbody Truck which since 2002 has started in the stop production (Discontinue). This car offers an incredible machine because it can be used to tow another vehicle.
Nissan Frontier is the product of Nissan which has an Autotech design concept. The latest design of the 4×4 pickup truck has a new nickname the Nissan Navara Sport version. In accordance with the concept that the 4 × 4 car this really looks handsome and masculine exterior design. Even the feel of a luxury car that remains attached to the manly and masculine. Well sort of thing that makes Pickup Truck or car made by Nissan 4 × 4, many become a target for those who have a spirit of adventure.
How to Reset Nissan Frontier TPMS Tire Pressure Light Without Scan Tool:
To reset the Tire Pressure Monitoring System (TPMS) light on your 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 Nissan Frontier, follow these steps:
- Make sure the vehicle is at a complete stop
- Turn the engine switch off
- Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
- Driving for a few miles (kilometers), calibration will complete after 20 minutes of cumulative driving at 25 mph.
If the above procedure does not work, try using the following procedure at your own risk!
Time needed: 17 minutes
- Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
- Locate the TPMS interface plug. This is a white female plug that is attached to the OBD II wire loom under the dash. You may have to cut the tape that is holding the TPMS interface plug to the OBD II wire loom.
- Insert a paper clip or wire to the plug interface.
- Turn the ignition ON but do not start the engine
- Tap the end of the paper clip on any exposed ground (metal) 6 times.
- If the way you are correct, the TPMS warning light will start blinking slowly.
If it flashes fast that’s not right. If yours isn’t flashing slowly then check your connections, turn the ignition off and start over at step 4.
- Once you confirm the lights do not stop flashing, driving for a few miles (kilometers), calibration will complete after 20 minutes of cumulative driving at 16-25 mph.
- The light will quickly come back on due to the low tire pressures. Refill your tires to the correct pressure.
For more details, please watch the following video:
We got this tutorial from Nissan specialists. The procedure above can be applied to the latest generations of Nissan Frontier (2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 model years). Hopefully the article of How to Reset Nissan Frontier TPMS Tire Pressure Light Without Scan Tool useful for you.
did this and the light still stays on
tire pressure is still ok after overnite and the check tire pressure under the odometer has dissapeard tire pressure is still good does the spare have a sensor too?
TPS sensors use the tire rolling to power them, so even if spare had sensor it wont operate