GMC Canyon: How To Reset Oil Life Light After Oil Change (2004-2021)
Last Updated on February 9, 2021 by Christ
GMC Canyon: How To Reset Oil Life Light After Oil Change (2004-2021) – The GMC Canyon is a medium-sized pickup truck produced by the American manufacturer GMC since 2004. This car was replacing the North American version of the Chevrolet S-10 pickup.
It is practically identical to the Chevrolet Colorado, which is also a General Motors automotive group brand. The Canyon belongs to the GMT355 platform, the same as the Hummer H3.
Contents
GMC Canyon: How To Reset Oil Life Light After Oil Change (2004-2021)
When the system has calculated that oil life has exceeded the specified service interval, a CHANGE ENGINE OIL SOON message will come on. You must perform an oil change on your vehicle and reset the system. Depending on your vehicle model, here are a few ways to reset the oil life light on 2004 2005 2006 2007 2008 2009 2010 2011 2012 2015 2016 2017 2018 2019 2020 2021 GMC Canyon:
1st Generation (2004-2012)
In the old generation of GMC Canyon, you can reset oil life using the trip knob in the cluster. Here’s how to do it:
- Turn on the ignition without starting the engine
- Press the trip button on the cluster briefly until “OIL LIFE” appears on the screen
- Press and hold the trip button until several beeps sound
- Verify the indicator has been reset by starting the engine
2nd Generation (2015-2021)
The second generation is today’s latest models, this generation was introduced since 2015. In this latest generation, you can reset the oil life by accessing the cluster app. Here’s how to do it:
With Gas Pedal
Time needed: 7 minutes
The easiest way to reset the oil life on this vehicle is by pressing the accelerator pedal 3 times. Here’s how to do it:
- Place the ignition to the RUN position without starting the engine
If your vehicle has the keyless starting system, hold down the ENGINE START/STOP button without pressing the brake pedal
- Fully depress the GAS pedal, three times within 5 seconds
Don’t rush, make sure you press it fully
- Turn off the ignition
Press the ENGINE START/STOP button once
- Verify the indicator has been reset by starting the engine
Done!
With Turn Signal Lever
- Turn on the ignition without starting the engine
- Press the MENU button briefly until “VEHICLE INFORMATION” appears on the screen
- Scroll down and find OIL LIFE menu by using the band
- Press and hold the SET/CLR button until Oil Life 100% appears on the screen
- Verify the indicator has been reset by starting the engine
With Steering Button
- Turn on the ignition
- Press the ◄ navigation button to enter the cluster app
- Select INFO
- Find the OIL LIFE menu by using the ▲▼ navigation button
- Press and hold the ✓ button to execute the oil life reset
These instructions are based on the GMC Canyon owner’s manual. This procedure should apply to the first and second generations of the GMC Canyon (2004 2005 2006 2007 2008 2009 2010 2011 2012 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article GMC Canyon: How To Reset Oil Life Light After Oil Change (2004-2021) can solve your problem. Good Luck!
Leave a Reply