Fuel Pump Inertia Switch Location on Ford Explorer 2001-2010 – The third generation Explorer was no longer based on the Ranger. The three doors disappeared from the range, and the recently launched Explorer Sports Trac skipped this generation of the Explorer. For its part, the five doors received a seven-seat option. Its two gasoline engines were a 4.0-liter V6 and 213 hp and a 4.6-liter V8 with 243 hp.
The fourth generation of the Explorer was named as “Truck of North America of the Year 2006”. o reverse the negative publicity it received for the demands, it was equipped with independent suspension on all four wheels, as well as active safety elements such as stability control and tire pressure monitoring system. The second generation Explorer Sports Trac was launched in early 2006, with the same range of engines.
Fuel Pump Inertia Switch Location on Ford Explorer 2001-2010:
The fuel pump shut-off (inertia) switch is a device that stops the fuel pump of the fuel delivery to the engine. If your engine cranks but does not start, this switch may have been activated. Here’s how to find and reset the switch:
- On the Ford Explorer, the fuel pump shut-off switch is located in the passenger’s footwell,
by the kick panel. May you need to remove the lower scuff plate to access the switch
- Make sure to turn off your vehicle
- Pushing in the Fuel pump shut-off (inertia) switch
- Turn the ignition to the ON position (Do not turn the ignition to ‘START) and wait a few seconds and return the key to off position.
For more details, please watch following video:
Warning! Do not reset the fuel system shut-off switch if you see or smell fuel from the fuel system. This procedure works on a 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 Ford Explorer that uses Petrol engine. Hopefully, the article of Fuel Pump Inertia Switch Location on Ford Explorer 2001-2010 useful for you.