2011-2017 Ford Fiesta TPMS Light Tire Pressure Sensor Reset
Last Updated on February 19, 2020 by Christ
2011-2017 Ford Fiesta TPMS Light Tire Pressure Sensor Reset – This American-made car has become the favorite cars in recent years. The car is designed with high technology is also sold millions of units worldwide since it has a high design and technology that are highly sought after by lovers of American cars. In addition, some features with advanced technology more attractive design and the latest innovations developed by the company Ford, especially for young people who want style with a good car sedan Ford is one of the best references to have.
The latest Fiesta has several types and tailored to your needs. One of the innovations made by Ford for this car is not having luggage, therefore if you include people who like to carry a lot of stuff this car is not the best choice. The capacity of this car is only enough for 4 people with some technological features such as audio equipment that can be directly connected to the gadgets we have.
2011-2017 Ford Fiesta TPMS Light Tire Pressure Sensor Reset:
If you receive a low-tire-pressure monitoring system (TPMS) warning light while driving and you want to clear or turning off the warning light on your 2011 2012 2013 2014 2015 2016 2017 Ford Fiesta, follow these instructions:
- Make sure the vehicle is at a complete stop
- Turn the engine switch off
- Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
- Driving for a few miles (kilometers), calibration will complete after 2 minutes of cumulative driving at 20 mph (32 km/h).
If you replaced a wheel, tire, TPMS sensor, etc. and are now getting a warning light on your car, then the sensor needs to be reset. For that you need to purchase the correct TPMS reset tool and follow these instructions:
- Stop the vehicle in a safe place and turn the engine switch off and engage the parking brake.
.
- Press and release the brake pedal.
.
- Turn the ignition from OFF to ON position three (3) times ending in the on position without starting the engine.
If your car has a Smart key button, press once to turn on, then press again to put the vehicle into ACC mode, then press again to turn the vehicle off. Repeat 2 more times, ending in ACC mode.
- Press the brake pedal again for 2 seconds, then release.
.
- Turn the ignition to OFF position (DO NOT remove the key)
.
- Turn the ignition from OFF to ON position three (3) times ending in the on position without starting the engine.
.
- If the reset mode has been entered successfully, the horn will sound once.
.
- Starting from the driver’s side front tire, place the relearn tool against the tire sidewall, near the valve stem. Then press the button to activate the TPMS sensor.
.
- Repeat the procedure on the right-front tire, the right rear tire, and the last one left rear tire.
.
- A horn chirp confirms that the sensor identification code has been matched to this tire and wheel position.
.
- After hearing the confirming horn chirp for the left rear tire, training is completed and a message is shown in the information display. Turn ignition to OFF position.
Adjust all tires to pressure listed on the tire placard.
For more details, please watch the following video:
We got this tutorial from Ford specialists. This procedure should be work on the latest generation of Ford Fiesta (2011 2012 2013 2014 2015 2016 2017 2018 2019 model years). Hopefully, the article of 2011-2017 Ford Fiesta TPMS Light Tire Pressure Sensor Reset useful for you. Good Luck!
Leave a Reply