2000-2010 Ford Expedition Fuel Inertia Switch Reset Location
Last Updated on January 14, 2020 by Christ
2000-2010 Ford Expedition Fuel Inertia Switch Reset Location – The Expedition is a full-size SUV produced by Ford since 1997. Introduced in 1997 to replace the Ford Bronco, he was initially placed in the Ford range, including the smaller Ford Explorer and the larger Ford Excursion. Since 2005, with the withdrawal of the latter, the Expedition became the SUV with towing capacity and off-road features, larger than the Ford. To overcome the withdrawal of the Excursion, it was introduced a version of the Expedition, the EL / Max model.
Ford used for the first time the name “Expedition” in 1995 for a production of the Explorer Sport. Until 2009 all the Expedition were manufactured in Wayne, Michigan. From this date, the production was moved to Louisville, Kentucky, since the Ford converted the production lines of the plant in Wayne for the assembly of the Focus.
2000-2010 Ford Expedition Fuel Inertia Switch Reset Location:
Time needed: 7 minutes
Fuel pump shut-off (inertia) switch is a device that stops the fuel pump of the fuel delivery to the engine. If your engine cranks but does not start, this switch may have been activated. Here’s how to find and reset the switch:
- On 2000 2001 2002 Ford Expedition, the fuel pump shut-off switch is located behind the right lower kick panel trim. While On 2003-2006 Ford Expedition located in the left rear quarter trim panel, near the liftgate. The switch is located behind an access panel. And on the 2008-2010 years model is located behind an access panel in the left rear quarter trim panel, near the liftgate.
- Make sure to turn off your vehicle
- Pushing in the Fuel pump shut-off (inertia) switch
- Turn the ignition to the on position and wait a few seconds and return the key to off position.
This tutorial is based on the Ford owner’s manual. This procedure works on a Ford Expedition 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 model years. Hopefully the article of 2000-2010 Ford Expedition Fuel Inertia Switch Reset Location useful for you.
How do I get access to replace this switch? By removing the tail light lens?
Not the tail-light lens.
Remove the full trim panel, or cut a section of the trim panel that will provide access to the switch without removing the full trim panel. Removing the full panel only takes a few minutes.
To order a new switch: https://www.fordpartsgiant.com. $7.95
I typed in how to replace and all I get is location. I know where it’s at. I know how to reset. I need to know how to change it. What do I need to take off to get it out.