2013-2017 Dodge SRT Viper Tire Pressure TPMS Light Reset
2013-2017 Dodge SRT Viper Tire Pressure TPMS Light Reset – The Dodge Viper is an American sports car, produced by the Chrysler Group Dodge brand since 1992. Since its debut was produced in four generations (two series with two updates each) until 2010. In 2012 he debuted the third series (fifth generation), and is marketed in SRT brand. In some European markets the car was sold to Chrysler brand.
In April 2012 it was presented a new version of the Viper, now under the SRT brand. This version, while presenting a line that is no more than an evolution of the preceding, has been completely redesigned from the ground, and shows much more refined interior than in the past. The engine is a 8.4 L V10 from 649 hp (477 kW) to 814 Nm of torque, and for the first time is equipped with electronic systems to assist the driver which, however, are deactivated.
2013-2017 Dodge SRT Viper Tire Pressure TPMS Light Reset:
If you receive a low-tire-pressure monitoring system (TPMS) warning light while driving and you want to clear or turning off the warning light on your 2013 2014 2015 2016 2017 Dodge SRT Viper, follow these instructions:
- Make sure the vehicle is at a complete stop
- Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
- Driving for a few miles (kilometers), calibration will complete after 20 minutes of cumulative driving at least 25 km/h (16 mph), and then verify that it turns off.
Note: When filling warm tires, the tire pressure may need to be increased up to an additional 4 psi (30 kPa).
For more details, please watch the following video:
The procedure above can be applied to the latest generations of Dodge SRT Viper (2013 2014 2015 2016 2017 model years). Hopefully, the article of 2013-2017 Dodge SRT Viper Tire Pressure TPMS Light Reset useful for you. Good Luck! 😀