2009-2019 Citroën DS3 Service Light Reset Guide
Last Updated on May 3, 2021 by Christ
2009-2019 Citroën DS3 Service Light Reset Guide – The DS3 is a high-end compact car in the B segment produced by the French car manufacturer Citroën from 2010 until 2014. From 2015, however, the vehicle was marketed in the range of the new brand of DS Automobiles until the cessation of its production, which took place in 2019.
The DS3 was born on the same platform as the second series C3, which is also the same as the 207 and the C3 Picasso. The front has a pseudo-MacPherson pattern, and the rear has a deformable cross-member, while the braking system has discs at the front.
2009-2019 Citroën DS3 Service Light Reset Guide
Time needed: 3 minutes
When the wrench or spanner indicator appears and flashes in the display, it’s time for regular service at the workshop. The service interval must be reset after performed the maintenance service on your vehicle. Here is how to reset the service light on Citroën DS3:
- Place the ignition to the off position
Make sure your vehicle is stopped in a safe place
- Press and hold the 🔧 000 button
The button is located on the instrument cluster
- Turn on the ignition without starting the engine
The screen will start the countdown
- Keep press the 🔧 000 button until the countdown is complete
Release the button when the display shows “=0”
- Verify the indicator has been reset by starting the engine
Done!
These instructions are based on the Citroën DS3 owner’s manual. This procedure should apply to the first generation of the Citroën DS3 (2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 model years). Hopefully, the article 2009-2019 Citroën DS3 Service Light Reset Guide can solve your problem. Good Luck!
Leave a Reply