Citroën C4: How To Reset Wrench Service Light (2011-2021)

Citroën C4: How To Reset Wrench Service Light (2011-2021) – The C4 is a C-segment car produced by Citroën in two generations from 2004 to 2018 and subsequently from 2020 when the third and current generation was launched on the market. The first generation of the C4 was the only one to be offered in more than one body variant.

The second generation was instead offered only as a hatchback but had much more difficulty establishing itself in a market, that of segment C cars, which was increasingly fierce over the years. Only 610,000 were produced in this second edition.

Citroën C4: How To Reset Wrench Service Light (2011-2018)

Citroën C4: How To Reset Wrench Service Light (2011-2018)

When the wrench or spanner indicator appears and flashes in the display, it’s time for regular service at the workshop. The service interval must be reset after performed the maintenance service on your vehicle. Depending on your vehicle model, here are a few ways to reset the service light on Citroën C4:

2nd Generation (2011-2018)

Time needed: 3 minutes.

In this second generation (2010 2011 2012 2013 2014 2015 2016 2017 2018), you can reset the service interval using the 000 button in the cluster. Follow these step:

  1. Place the ignition to the off position

    Make sure your vehicle is stopped in a safe place

  2. Press and hold the 🔧 000 button

    The button is located on the instrument cluster
    service wrench light reset

  3. Turn on the ignition without starting the engine

    The screen will start the countdown

  4. Keep press the 🔧 000 button until the countdown is complete

    Release the button when the display shows “=0”

  5. Verify the indicator has been reset by starting the engine

    Done!

3rd Generation (2020-2021)

Just like the previous generation, in this generation (2020 2021 2022) you can reset the service interval using the buttons in the cluster:

  • Place the ignition to the off position
  • Press and hold the button on the end of the turn signal lever
service wrench light reset
  • Turn on the ignition without starting the engine
  • The screen will start the countdown
  • Keep press the button until the countdown is complete
  • Verify the indicator has been reset by starting the engine

These instructions are based on the Citroën C4 owner’s manual. This procedure should apply to the second generation of the Citroën C4 (2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 model years). Hopefully, the article Citroën C4: How To Reset Wrench Service Light (2011-2021) can solve your problem. Good Luck!

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.