2006-2011 Buick Lucerne Oil Life Light Reset Guide
Last Updated on January 21, 2021 by Christ
2006-2011 Buick Lucerne Oil Life Light Reset Guide – The Lucerne is a full-size passenger car produced by Buick between 2006 to 2011. Introduced at the 2005 Chicago Motor Show, the Lucerne replaced both Park Avenue and LeSabre for the 2006 model year.
The Lucerne had the 3.8 L displacement V6 3800 engine as its base engine (hence the name “3800”). The 4.6 L Cadillac V8 was optional. The Lucerne was also available with the Magnetic Ride Control active suspension system, already used on the Corvette.
2006-2011 Buick Lucerne Oil Life Light Reset Guide
Time needed: 7 minutes
When the system has calculated that oil life has exceeded the specified service interval, a CHANGE ENGINE OIL SOON message will come on. You must perform an oil change on your vehicle and reset the system. Here is how to reset the oil life light on Buick Lucerne.
- Turn on the ignition without starting the engine
Make sure the vehicle completely stops
- Press the VEHICLE INFO button briefly until “OIL LIFE REMAINING” appears on the screen
The button is located on the instrument panel
- Press and hold the ✓ button until Oil Life 100% appears on the screen
The CHANGE ENGINE OIL SOON message will go off and the sound of chimes will be heard
- Verify the indicator has been reset by starting the engine
Done!
These instructions are based on the Buick Lucerne owner’s manual. This procedure should apply to the first generation of the Buick Lucerne (2006 2007 2008 2009 2010 2011 model years). Hopefully, the article 2006-2011 Buick Lucerne Oil Life Light Reset Guide can solve your problem. Good Luck!
Leave a Reply