2014-2020 Peugeot 108 Tyre Pressure Warning Light Reset
Last Updated on January 20, 2020 by Christ
2014-2020 Peugeot 108 Tyre Pressure Warning Light Reset – The Peugeot 108, is an automobile of the French manufacturer Peugeot. It is presented at the Geneva International Motor Show 2014 (March 6-16, 2014). Its commercialization began in June 2014. It was built in collaboration with the Japanese manufacturer Toyota in the TPCA plant in Kolin. The style stands out more than the Citroën C1 – Peugeot 107 – Toyota Aygo first generation. It is available in version 3 and 5 doors and in discoverable version (flexible roof in sliding canvas).
There is no diesel engine. All mechanical combinations are Euro 6. Only PSA versions are available in addition to 1.2 VTi 82. The Aygo is satisfied with 1.0 VTi of the old generation redesigned and eligible Euro 6; He wins 1 horse in passing. In 2015, the 108 exists in a new special series named Roland Garros that Peugeot will apply to its vehicles. A discoverable roof version named Top! is available. It became mid-2015, Peugeot’s only convertible.
2014-2020 Peugeot 108 Tyre Pressure Warning Light Reset:
Time needed: 3 minutes
If you receive a low-tyre pressure monitoring system (TPMS) warning light while driving and you want to clear or turning off the warning light on your Peugeot 108, follow these instructions:
- Make sure the vehicle is at a complete stop
- Turn the engine switch off
- Adjust the tyre inflation pressure recommended on the tyre placard located on the door panel.
- Turn the ignition to ON position without starting the engine.
- Open the glove box.
- Locate and press the SET button until you hear a signal
For more details, please watch the following video:
This tutorial is based on the Peugeot owner’s manual. This procedure should be work on the latest generation of Peugeot 108 (2014 2015 2016 2017 2018 2019 2020 model years). Hopefully, the article of 2014-2020 Peugeot 108 Tyre Pressure Warning Light Reset useful for you. Good Luck!
Leave a Reply