2011-2016 Ford Focus TPMS Light Low Tire Pressure Sensor Reset

Last Updated on January 15, 2020 by Christ

2011-2016 Ford Focus TPMS Light Low Tire Pressure Sensor Reset – At the Essen Motor Show 2015 Event in Germany, Ford introduced the Focus Sport premiered. Based on the Focus ST variant, the sporty modify offered in two body colors of a race red or black panther. Both colors are given a combination of black or red on the roof, diffuser, grille bar, and a rearview mirror cover. In order to further reinforce the presence of the nuances of the sport, Ford complete with a set of black wheels measuring 18 inches.

Log into the cabin space, an atmosphere similar to the exterior will also be felt here. The gear lever is given a touch of black and red, as well as on the handbrake, steering wheel, sporty seats, and pedals. Ford Focus Sport powered by a turbocharged 1.5-liter EcoBoost engine. The machine offers different energy that is 150 hp and 182 hp.

2011-2016 Ford Focus TPMS Light Low Tire Pressure Sensor Reset

2011-2016 Ford Focus TPMS Light Low Tire Pressure Sensor Reset:

If you receive a low-tire-pressure monitoring system (TPMS) warning light while driving and you want to clear or turning off the warning light on your 2011 2012 2013 2014 2015 2016 Ford Focus, follow these instructions:

  • Make sure the vehicle is at a complete stop
  • Turn the engine switch off
  • Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
  • Driving for a few miles (kilometers), calibration will complete after 2 minutes of cumulative driving at 20 mph (32 km/h).

Time needed: 17 minutes

If you replaced a wheel, tire, TPMS sensor, etc. and are now getting a warning light on your car, then the sensor needs to be reset. For that you need to purchase the correct TPMS reset tool and follow these instructions:

  1. Stop the vehicle in a safe place and turn the engine switch off and engage the parking brake.

  2. Adjust the tire inflation pressure recommended on the tire placard located on the door panel.

  3. Turn the ignition to the ON position without starting the engine.

  4. Turn the hazard flashers ON then OFF 6 times within 5 seconds.

  5. If the reset mode has been entered successfully, the horn will sound once.

  6. Decrease tire pressure for 10 seconds, starting from the driver’s side front tire (LF) until horn sounds.

  7. After horn sounds, proceed to the right (passenger’s side) front tire, and repeat the procedure in step 5.

  8. Next, proceed as in step 5 for the right (passenger’s side) rear tire and then left (driver’s side) rear tire.

  9. After hearing the confirming horn chirp for the left rear tire, training is completed and a message is shown in the information display. Turn ignition to OFF position.

For more details, please watch the following video:

This tutorial is based on the Ford owner’s manual. This procedure should be work on the latest generation of Ford Focus (2011 2012 2013 2014 2015 2016 model years). Hopefully, the article of 2011-2016 Ford Focus TPMS Light Low Tire Pressure Sensor Reset useful for you. Good Luck!

(Visited 40,939 times, 1 visits today)

5 Comments on “2011-2016 Ford Focus TPMS Light Low Tire Pressure Sensor Reset

  1. OK I have a 2016 focus se the tire pressure is bout 32 in each tire recomened is 36 OK that’s bout 4 pounds low and no tpms light comes on is it a certain low pressure before the tpms shows

  2. Is there a way to completely turn off the TPMS, so that the dash warning light/display no longer appear when running other sets of tires without sentors.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.