2005-2010 Ford Mustang Fuel Inertia Switch Reset Location
Last Updated on January 14, 2020 by Christ
2005-2010 Ford Mustang Fuel Inertia Switch Reset Location – Fifth-generation Ford Mustang by Ford in 2004 to 2014 in the city of Flat Rock, Michigan, Flat Rock City assembly plant to build a small carriage. The fifth-generation Mustang began in 2005, then received a facelift in 2010. This concept car was developed in two trial between February 2002 to November, a convertible version and a coupe version of the car. These two concept cars introduced by Ford at the Detroit Auto Show on January 5, 2003.
2005 Mustang on September 7, 2004, to begin production. US market launch and customer delivery will start at the end of October 2004. 2005-2009 Ford Mustang equipped with a cast-iron block 4.0 l SOHC Cologne V6 engine replaces the 2004 and other old models used a 3.8-liter V6 engine, OHV Essex. This engine can produce 10 horsepower (157 kW) at 3500 pm and 40 lb-ft (325 N · m) of torque at 5300 pm.
2005-2010 Ford Mustang Fuel Inertia Switch Reset Location:
Time needed: 7 minutes
Fuel pump shut-off (inertia) switch is a device that stops the fuel pump of the fuel delivery to the engine. If your engine cranks but does not start, this switch may have been activated. Here’s how to find and reset the switch:
- On the 2005-2010 Ford Mustang, the fuel pump shut-off switch is located in the driver’s footwell, by the hood release.
- Make sure to turn off your vehicle
- Pushing in the Fuel pump shut-off (inertia) switch
- Turn the ignition to the on position and wait a few seconds and return the key to off position.
For more details, please watch the following video:
This tutorial is based on the Ford owner’s manual. This procedure works on a Ford Mustang 2005 2006 2007 2008 2009 2010 model years. Hopefully the article of 2005-2010 Ford Mustang Fuel Inertia Switch Reset Location useful for you.
Thank you everyone I actually hit a curb too and couldn’t get car to start and that freaking worked !