2020 Toyota Highlander Tire Pressure System TPMS Light Reset

Time needed: 7 minutes

If you replaced a wheel, tire, TPMS sensor, etc. and are now getting a warning light on your car, then the sensor needs to be reset. Follow these steps to reset the Tire Pressure Monitoring System (TPMS) light on your Toyota Highlander:

1. Stop the vehicle in a safe place and engage the parking brake.

   Turn OFF the engine

2. Adjust the tire inflation pressure recommended on the tire placard

   The tire placard located on the door panel

3. Turn the engine switch to the “ON” position

   If your vehicle has the keyless starting system, press the ENGINE START STOP button twice without pressing the brake pedal

4. Select the by using navigation button

   The button is located on the steering
   
5. Go to the VEHICLE SETTINGS menu

   This menu has symbols like the following image:
   

6. Scroll to TPWS (Tire Pressure Warning System)

   Press the OK button to select the menu

7. Select SET PRESSURE then press and hold the OK button until the tire pressure warning light blinks 3 times.

   When the message disappears, initialization is complete.

8. The inflation pressure of each tire will display on the multi-information display after 30 minutes of cumulative driving at 25 mph (40 km/h)

   Done!