Service Reset: Hyundai Santa Fe Oil Wrench Light (2013-2021)

Last Updated on December 24, 2020 by Christ

Service Reset: Hyundai Santa Fe Oil Wrench Light (2013-2021) – The Santa Fe is an SUV produced by the Korean car manufacturer Hyundai Motor Company since 2000. The first SUV was produced and designed entirely by Hyundai and played a key role in the company’s restructuring.

The third generation of the Santa Fe is introduced at the New York Motor Show in April 2012. The new series is jointly designed between Hyundai’s research and development center in California and its Seoul headquarters in South Korea.

Service Reset Hyundai Santa Fe Oil Wrench Light (2013-2021)

Contents

Service Reset: Hyundai Santa Fe Oil Wrench Light (2013-2021)

The service light will flash each time you turn ON the ignition when your vehicle exceeds the specified service interval. The service interval must be adjusted after performed maintenance on your vehicle. Depending on your vehicle model, here are a few ways to reset the oil light on 2013 2014 2015 2016 2017 2018 2019 2020 2021 Hyundai Santa Fe:

3rd Generation (2013-2018)

For this third generation model, you can reset the service required light through the cluster display. Here’s how to reset it:

  • Place the ignition to the ON position without starting the engine
  • Go to the ⚙️ USER SETTINGS mode by pressing the ❐ MODE button repeatedly
hyundai oil service light reset
  • Select SERVICE INTERVAL by using the ▼ button
  • Make sure to activate the service interval function by select ON
  • In this menu you can set a maintenance reminder at a specific interval by adjust the Milage or Period
  • Use the ▼ button to change the digit value. Press the ⏎ button to confirm the changes.

4th Generation (2019-2021)

Time needed: 7 minutes

Just like the previous generation, you can reset the service light via the cluster display but with a different button. Here’s how to do it:

  1. Place the ignition to the ON position without starting the engine

    If your vehicle has the keyless starting system, press the ENGINE START/STOP button twice without pressing the brake pedal

  2. Go to the ⚙️ USER SETTINGS mode by pressing the ❐ MODE button repeatedly

    The button is located on the steering wheel
    hyundai oil service light reset

  3. Find and select SERVICE INTERVAL

    Use the navigation switch to scroll and press OK button to enter the. menu

  4. Make sure you activate the service interval function by giving a check mark

    In this menu you can set a maintenance reminder at a specific interval by adjust the Time or Distance

  5. Use the navigation switch to change the digit value. Press the OK button to confirm the changes.

    Done!

These instructions are based on the Hyundai Santa Fe owner’s manual. This procedure should apply to the third and fourth generations of the Hyundai Santa Fe (2013. 2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article Service Reset: Hyundai Santa Fe Oil Wrench Light (2013-2021) can solve your problem. Good Luck!

(Visited 811 times, 1 visits today)

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.