Saturn Outlook: How To Reset Oil Life After an Oil Change (2007-2010)
Last Updated on March 11, 2021 by Christ
Saturn Outlook: How To Reset Oil Life After an Oil Change (2007-2010) – The Outlook is a full-size passenger car produced by the Saturn Corporation from 2006 to 2010. It was marketed with a single body type, a five-door crossover SUV.
It was based on the General Motors Lambda platform and had a front and transverse engine. The traction was front or integral. The only engine available on the Outlook was a twin-cam V6 with 24 valve timing, a 3.6 L displacement.
Saturn Outlook: How To Reset Oil Life After an Oil Change (2007-2010)
Time needed: 7 minutes
When the system has calculated that oil life has exceeded the specified service interval, a CHANGE ENGINE OIL SOON message will come on. You must perform an oil change on your vehicle and reset the system. Here is how to reset the oil life light on 2007 2008 2009 2010 Saturn Outlook:
- Turn on the ignition without starting the engine
Make sure the vehicle completely stops
- Press the VEHICLE INFO button briefly until “OIL LIFE REMAINING” appears on the screen
The button is located on the center console
- Press and hold the ✓ button until Oil Life 100% appears on the screen
The CHANGE ENGINE OIL SOON message will go off and the sound of chimes will be heard
- Verify the indicator has been reset by starting the engine
Done!
These instructions are based on the Saturn Outlook owner’s manual. This procedure should apply to the first and second generations of the Saturn Outlook (2007 2008 2009 2010 model years). Hopefully, the article Saturn Outlook: How To Reset Oil Life After an Oil Change (2007-2010) can solve your problem. Good Luck!
Leave a Reply