How To Reset Wrench Service Light on Hyundai Azera (2015-2017)
Last Updated on December 29, 2020 by Christ
How To Reset Wrench Service Light on Hyundai Azera (2015-2017) – The Hyundai Grandeur is a sedan produced by the Korean car manufacturer Hyundai Motor Company since 1986. The fourth series of Grandeur is sold on the American market as the Hyundai Azera.
The engine range consists of the new 3.3 and 3.8 V6 Λ Lambdas capable of 235 and 264 horsepower. Both engines are combined with a 5-speed H-Matic automatic transmission.
How To Reset Wrench Service Light on Hyundai Azera (2015-2017)
Time needed: 7 minutes
The service light will flash each time you turn on the ignition when your vehicle exceeds the specified service interval. The service interval must be adjusted after performed maintenance on your vehicle. Here is how to reset the service light on 2015 2016 2017 Hyundai Azera:
- Place the ignition to the ON position without starting the engine
If your vehicle has the keyless starting system, press the ENGINE START/STOP button twice without pressing the brake pedal
- Go to the ⚙️ USER SETTINGS mode by pressing the ❐ MODE button repeatedly
The button is located on the steering wheel
- Find and select SERVICE INTERVAL
Use the navigation switch to scroll and press OK button to enter the. menu
- Make sure you activate the service interval function by giving a check mark
In this menu you can set a maintenance reminder at a specific interval by adjust the Time or Distance
- Use the navigation switch to change the digit value. Press the OK button to confirm the changes.
Done!
These instructions are based on the Hyundai Azera owner’s manual. This procedure should apply to the fifth generation of the Hyundai Azera (2015 2016 2017 model years). Hopefully, the article How To Reset Wrench Service Light on Hyundai Azera (2015-2017) can solve your problem. Good Luck!
Leave a Reply