How To Reset Audi A4 TPMS Tire Pressure Monitor System (2008-2015)

How To Reset Audi A4 TPMS Tire Pressure Monitor System (2008-2015) – Audi has always put out the highest quality products. One of the best products is the Audi A4. This car is very attractive because it already has many advanced features that will not be found on other brands. Audi A4 also includes cars that are in demand in the market. Even when the car is launched it has made a lot of lovers of Audi captivated. One characteristic that exists on the existing Audi car in this car is a very luxurious design.

Audi A4 using a machine that has a power of 125 ps. Of torque that can be produced is 320 nm when the engine rotates at a speed of 3500 rpm. The specialty of this car is to have an astonishing speed and acceleration. To be driven at speeds of 100 km / h this car takes only about 8.3 seconds. Audi A4 with engine performance is very good, the car has become one of the favorite cars. The engine is combined with an automatic transmission which is very convenient.

How To Reset Audi A4 TPMS Tire Pressure Monitor System (2008-2015):

Without MMI:

For older models of vehicles, you can reset the TPMS via the cluster display.

• Make sure the vehicle is at a complete stop
• Turn the engine switch off
• Adjust the tire inflation pressure recommended on the tire placard located on the door panel.
• Turn the ignition to ON position without starting the engine.
•  Use the RESET button on end of wiper lever to enter to the DISPLAY TYPE menu

• Scroll up and select SET
• Scroll down and select TYRE PRESSURE
• Select STORE and confirm it

This tutorial is based on the AUDI owner’s manual. This procedure should be work on the old generation of Audi A4 (2008 2009 2010 2011 2012 2013 2014 2015 model years). Hopefully the article of How To Reset Audi A4 TPMS Tire Pressure Monitor System (2008-2015) useful for you. Good Luck!