How To Reset Spanner Service Light on Peugeot 4008 (2013-2017)
Last Updated on May 19, 2021 by Christ
How To Reset Spanner Service Light on Peugeot 4008 (2013-2017) – The Peugeot 4008 is a compact crossover produced by the French car manufacturer Peugeot. Peugeot produced the first series of the Peugeot 4008 from 2012 to 2017.
The production of the 4008 has so far been divided into two distinct generations: the first was mainly marketed in Europe, although not in all countries, while the second, derived from the second generation of the 3008, was reserved for the Chinese market.
How To Reset Spanner Service Light on Peugeot 4008 (2013-2017)
Time needed: 3 minutes
If you see the service indicator blinks, it means that you have to perform maintenance service on your car. You also need to reset the service interval so you know when to do the next service. Depending on your vehicle model, here are a few ways to reset the service light on Peugeot 4008:
- Place the ignition to the off position
Make sure your vehicle is stopped in a safe place
- Press the INFO button briefly until 🔧 service indicator displayed
The button is located on the instrument panel
- Hold down the INFO button until 🔧 indicator flashes
Release the button when the indicator start flashes
- Press the INFO button again to execute the service reset
The CLEAR and then new time remaining before the next service due will appears in the screen
- Verify the indicator has been reset by starting the engine
Done!
These instructions are based on the Peugeot 4008 owner’s manual. This procedure should apply to the first generation of the Peugeot 4008 (2012 2013 2014 2015 2016 2017 model years). Hopefully, the article How To Reset Spanner Service Light on Peugeot 4008 (2013-2021) can solve your problem. Good Luck!
Leave a Reply