How To Reset Service Required Light on Jaguar E-Pace (2018-2021)
Last Updated on December 9, 2020 by Christ
How To Reset Service Required Light on Jaguar E-Pace (2018-2021) – The Jaguar E-Pace is a C-segment luxury crossover SUV produced by the British car manufacturer Jaguar since 2017. Production takes place in Austria at Magna Steyr’s Graz plant.
The all-wheel drive is developed in collaboration with Land Rover, although a 2-wheel drive version is available for some engines. There is also a system that adapts the car’s response and attitude to the type of road surface, similar to the “Terrain Response” of Land Rover models.
How To Reset Service Required Light on Jaguar E-Pace (2018-2021)
Time needed: 7 minutes
When you exceed the next scheduled service interval, the Service Required message will display in the screen. This indicator system must be reset after performed the maintenance on your Jaguar E-Pace. Follow this step to get started:
- Open the bonnet (hood) and close all doors
Make sure your vehicle stops in a safe place
- Place the ignition to the ON position without starting the engine
If your vehicle has the keyless starting system, press the START/STOP button once without pressing the brake pedal
- Open the driver’s door
Make sure you open driver’s-side door
- Fully depress and hold the BRAKE and GAS pedals for 10 seconds
The “Service Resetting” message will appears in the display
- Turn off the ignition
Press the ENGINE START/STOP button once
- Verify the indicator has been reset by starting the engine
Done!
These instructions are based on the Jaguar E-Pace owner’s manual. This procedure should apply to the first generation of the Jaguar E-Pace (2018 2019 2020 2021 model years). Hopefully, the article How To Reset Service Required Light on Jaguar E-Pace (2018-2021) can solve your problem. Good Luck!
Thanks, this is crazy, but it works! 2019 E-Pace.