How To Reset Service Light on Kia Rio After Oil Change (2012-2021)

Last Updated on January 5, 2021 by Christ

How To Reset Service Light on Kia Rio After Oil Change (2012-2021) – The Kia Rio is a passenger car classified as a compact hatchback produced by the South Korean car manufacturer Kia Motors since 2000. The car replaced the Kia Pride but has kept the same name in some Asian markets.

In 2011 the third generation was presented, while from the end of 2017, Rio put on the fourth generation the market. The Rio is marketed with a petrol engine (85 hp 1.2 CVVT) and two diesel engines (a new 75 hp 1.1 CRDi and a 90 hp 1.4 CRDi).

How To Reset Service Light on Kia Rio After Oil Change (2012-2021)

Contents

How To Reset Service Light on Kia Rio After Oil Change (2012-2021)

The service light will appear each time you turn on the ignition when your vehicle exceeds the specified service interval. You must adjust the service interval after performed maintenance on your vehicle. Depending on your vehicle model, here are a few ways to reset the oil light on 2012 2013 2014 2015 2016 2017 2018 2019 2020 Kia Rio:

With Trip Button

Follow these instructions if your vehicle has a trip button on the steering wheel.

  • Place the ignition to the ON position without starting the engine
  • Press and hold the TRIP button until USER SETTINGS appears on the display
hyundai oil service light reset
  • Select MAINTENANCE by using the TRIP button to scroll and press the RESET button to select the menu
  • Select ENGINE OIL
  • In this menu you can set an engine oil reminder at a specific interval

With Mode Button

Time needed: 7 minutes

Follow these instructions if your vehicle is equipped with a mode button on the steering wheel.

  1. Place the ignition to the ON position without starting the engine

    If your vehicle has the keyless starting system, press the ENGINE START/STOP button twice without pressing the brake pedal

  2. Go to the ⚙️ USER SETTINGS mode by pressing the ❐ MODE button repeatedly

    The button is located on the steering wheel
    kia wrench service light reset

  3. Find and select SERVICE INTERVAL

    Use the navigation switch to scroll and press OK button to enter the menu

  4. Make sure you activate the service interval function by giving a check mark

    In this menu you can set a maintenance reminder at a specific interval by adjust the Time or Distance

  5. Use the navigation switch to change the digit value. Press the OK button to confirm the changes.

    Done!

This tutorial is based on the Kia Rio owner’s manual. This procedure should apply to the third and fourth generations of Kia Rio (2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the article How To Reset Service Light on Kia Rio After Oil Change (2012-2021) can solve your problem. Good Luck!

(Visited 2,105 times, 1 visits today)

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.